Rong Fu Benchtop Milling machines:
These mills are good for small shops, laboratories, garages and basements. For milling and drilling. They come with R8 spindles to use standard milling machine collets and cutters.

Rong Fu model RF-31 Drill-Mill . • Motor: 1.5 HP, 110 volt 1 phase or 220 volt 3 phase • 1 Speed Motor: 150-3000 • Spindle Taper : MT3 or R8 • Spindle Stroke: 5" • Swing: 13-3/8 • Working Table: 9"x 30" • Longitudinal travel: 16-1/8" • Cross Travel: 7-1/4" • Column Diameter: 4-1/2" • N.W/G.W. : 600/660 LBS Click to request a quote for this machine Options available: • Stand (shown) • Power Down Feed • 2 Speed Motor: 60 HZ 75-3000 • Longitudinal Table Power Feed

Rong Fu RF-40 Geared Head Drill-Mill • Head tilts 90° left and 45° right and swivels • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 6.5" • Spindle to table (max): 18.5" • Table Longitudinal X travel: 19.75" • Table Cross Y Travel: 9" • Shipping weight: 650 Lbs Capacity: drilling - 1.25" (steel), end mill: 3/4", face mill - 4" • Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch, table with standard T-slots. Manufactured in Taiwan. Click to Request this Quote Options available: Cabinet with chip pan (shown in photo), power down feed, 52 piece clamping kit, work light, floor type coolant system, digital readout.

Rong Fu RF-45 Geared Head Drill-Mill • Extra heavy duty square column design • Head tilts 90° left and 45° right • Motor: 1.5 HP, 110v/220volt, 1 phase or 220v/440volt 3 phase • 5 speed spindle: 60, 130, 230, 450, 1500 rpm • Spindle Taper : R8 • Spindle/Quill Travel: 5-1/8" • Spindle to column: 10" • Spindle to table (max): 18.5" • Table Longitudinal X travel: 20.5" • Table Cross Y Travel: 8.25" • Shipping weight: 800 Lbs Capacity: drilling - 1.25" (steel), end mill: 3/4", face mill - 4" • Standard Accessories: 1/2" drill chuck w/key, drill chuck arbor MT3/JT6, forward/reverse switch, table with standard T-slots. Manufactured in Taiwan. Click to Request this Quote Options available: Cabinet with chip pan (shown in photo), power down feed, 52 piece clamping kit, work light, floor type coolant system, digital readout.

Click for Benchtop Lathe Machines

Click for full size Bridgeport style Milling Machines

Click for American Machine Tools Company Homepage

Privacy Clause

Terms & Conditions

Frequently Asked Questions