MILLING MACHINES
We sell Knee type Vertical
and Horizontal Mills to the USA, Canada, and Latin America. Birmingham,
GMC and JET options & upgrades are installed in USA. We also offer
ACRA which comes pre-equipped with a digital readout and an X table power
feed. Most of these milling machines are very similar to the famous Bridgeport
Mill design. Choose one and request a quote.
A+ Rating
Metal Milling is the
work of machining flat, curved, or irregular surfaces by feeding the workpiece
against a rotating cutter containing a mutiple cutting edges. The milling
machine consists basically of a motor driven spindle, which mounts and
revolves the milling cutter, and a reciprocating adjustable worktable,
which mounts and feeds the workpiece. Milling machines are basically classified
as vertical or horizontal. These machines are also classified as knee-type
and bed type.
Knee-type milling machines have a vertically adjustable worktable resting
on a saddle which is supported by a knee shaped massive casting that rides
vertically on the milling machine column and can be clamped rigidly to
the column in a position where the milling head and milling machine spindle
are properly adjusted vertically for operation. Bed type mills have a
fixed table that holds more weight. Vertical milling machines have a spindle
located vertically, parallel to the column face, and mounted in a sliding
head that can be fed up and down by hand or power. Modern vertical milling
machines are designed so the entire head can also swivel to permit working
on angular surfaces. We do have an attachment option to convert a Birmingham
vertical mill into a horizontanal one.
Click
for Instructions how to use a milling machine
Click
for knee type vertical CNC Mills
Click
for CNC Bed Mills
Birmingham
Vertical Knee Milling Machines
BPS-1649C
9" x 49" Table, 16 speed
Click
to Request this Quote
•
Hardened & Ground Work Table
• Hardened & Ground On X. Y. Axis Slide Ways.
• Ground Work Table Tee Slots.
• Meehanite Casting (optional on BPS-1649C).
• 16 Speed, 3HP, 220V, 3phase Motor (1phase motor available)
• R-8 Spindle • Quill Travel: 5"
• Optional Powerfeed and Digital Readout
|
BIRMINGHAM
OPTIONS Available:
Installed Add-On package A (2 axis D.R.O., Align Servo Table
Feed X-axis, R8 Precision Collet Set, 6" Anglock Vise, 52 piece
Clamping Kit).
Other Options:
Inverter Drive
Slotting Attachment
Horizontal Milling Attachment
Rotary Table
Collet Sets
Drill Chuck
Raising Block
Flood Coolant System
Kurt or Angle Lock Vise
Clamping Kit
Halogen WorkLight
Bijur Auto Luber
Digital Readout (2 Axis OR 3 Axis)
Table Power Feed
Power Draw Bar Kit
|
BPV-3949C
9" x 49" Table, Variable Speed
Click
to Request this Quote
•
Hardened & Ground Work Table
• Hardened & Ground On X. Y. Axis Slide Ways.
• Ground Work Table Tee Slots.
• Meehanite Casting (optional on BPV-3949C).
• Variable Speed, 3HP, 220 or 440V, 3phase, Motor
(1phase motor available).
• R-8 Spindle • Quill Travel: 5"
• Optional Powerfeed and Digital Readout |
BPS-1054C
10" x 54" Table
Click
to Request this Quote
*16 Speed,
3HP, 220V, 3phase Motor (1phase motor available)
BPV-1054C
10" x 54" Table
Click
to Request this Quote
*Variable Speed,
3HP, 220 or 440V, 3phase, Motor
(1phase motor available).
--------------------------------
• Big Beafy machine for heavier jobs
• Hardened & Ground Work Table.
• Hardened & Ground On X. Y. Axis Slide Ways.
• Ground Work Table Tee Slots.
• R-8 Spindle • Quill Travel: 5"
• Optional Meehanite Casting with turcite coated X-ways.
• Optional Powerfeed and Digital Readout |
Birmingham
BPV-B2V Bed Type Mill
10" x 54" Table
Click to Request this Quote
• 5HP Heavy Duty Variable Speed Head.
• Z Axis AC Motor Rapid Up/Down.
• Hardened & Ground Work Table (10" x 54").
• Registered Meehanite Casting.
• Wear Resistant Turcite "B" On X & Y Saddle Ways.
• Square Ways on Y & Z Slideways.
• Ground Work Table Tee Slots.
• Variable Speed, 5HP, 220V/440Volts 3 phase Motor
• Choose Spindle: R8, ISO 30, or ISO NT40.
• Quill Travel 5"
• Auto Lube System.
• Coolant System.
• Splash Tray.
• Low Voltage Halogen Worklight.
• Control Panel.
• Optional Powerfeed and Digital Readout |
 |
GMC model GMM-949 Knee Mill
Standard
Features
• Available with variable speed or step pulley
• Manufactured in China with mill head from Taiwan
• Meehanite Casting
• Turcite Coating on X and Y table slide ways
• 9" x 49" table size
• ISO 9002 certified factory
• Mechanical step pulley 16 speeds from 90 - 5600 rpm
- or -
• Mechanical variable spindle speeds from 68 - 4200 rpm
- or -
• Electronic variable spindle speeds from 70 - 5000 rpm
• Heavy duty 3 HP motor, 220 volts, 3 phase
• Heavy Duty high grade castings
• Hardened & ground dovetail guideways
• Hardened & ground table and Ground table T-slots
• Precision ground ACME Leadscrews
• Chromed ground quill ( spindle )
• Tilting & rotating head
• Manual or automatic quill feeds 0.0015 , 0.003, 0.006 per spindle
revolution
• One shot lube system
• Front and rear rubber chip guards
• Tool box kit and leveling pads
• One year warranty for parts
• Way covers
• One draw bar
• Standard R8 spindle
Optional Equipment Available
• Electronic variable speed inverter drive
• Digital Readout
• Power air draw bar
• Coolant system w/ pump, nozzles and hoses
• Base coolant/chip drop pan
• Power feed table X-axis, installation included
• Power feed table Y-axis, installation included
• Power feed for knee up/down, installation included
• Riser Blocks
• Halogen work light
• Auto luber with alarm
• Anglock swivel vise
• 52 pcs clamping kit
• 11 pcs R8 collets set
• Phase converter for use with single phase.
|
New color is white.
Photo shows optional Digital ReadOut and Power Feed on X-axis.
• Table load capacity: 650 Lbs
• Table X-axis travel: 36"
• Table Y-axis travel: 12"
• Table knee Z-axis travel: 16"
• Spindle travel: 5"
• Spindle diameter: 3-3/8"
• Spindle to table - max: 18"
• Spindle to column: 7" min, 19" max
• Head swivel: 90 degrees
• Head tilt: 45 degrees
• Ram swivel: 360 degrees
• Weight:
Step pulley - 2650 Lbs.
Variable speed - 2350 Lbs.
• Size: 63" long x 57" wide x 83" high
Click
to Request a formal Quote with literature for this Milling Machine
|
GMC model GMM-1054 Knee Mill
Standard
Features
• Available with variable speed or step pulley
• Manufactured in Taiwan, assembled in China
• Meehanite Casting
• Turcite Coating on X and Y table slide ways
• 10" x 54" table size
• ISO 9002 certified factory
• Mechanical variable spindle speeds from 68 - 4200 rpm
- or -
• Electronic variable spindle speeds from 70 - 5000 rpm
• Heavy duty 3 HP motor, 220 volts, 3 phase
• Heavy Duty high grade castings
• Hardened & ground dovetail guideways
• Hardened & ground table and Ground table T-slots
• Precision ground ACME Leadscrews
• Chromed ground quill ( spindle )
• Tilting & rotating head
• Manual or automatic quill feeds 0.0015 , 0.003, 0.006 per spindle
revolution
• One shot lube system
• Front and rear rubber chip guards
• Tool box kit and leveling pads
• One year warranty on parts
• Way covers
• One draw bar
Optional
Equipment Available
• Electronic variable speed inverter drive
• Digital Readout
• Power air draw bar
• Coolant system w/ pump, nozzles and hoses
• Base coolant/chip drop pan
• Power feed table X-axis, installation included
• Power feed table Y-axis, installation included
• Power feed for knee up/down, installation included
• Riser Blocks
• Halogen work light
• Auto luber with alarm
• Anglock swivel vise
• 52 pcs clamping kit
• 11 pcs R8 collets set
• Phase converter for use with single phase.
|
New Color is white.
• Table load capacity: 650 Lbs
• Table X-axis travel: 36"
• Table Y-axis travel: 16-1/2"
• Table knee Z-axis travel: 16-1/2"
• Spindle travel: 5"
• Spindle diameter: 3-3/8"
• Spindle to table - max: 17"
• Spindle to column: 4" min, 27" max
• Head swivel: 90 degrees
• Head tilt: 45 degrees
• Ram swivel: 360 degrees
• Weight: 3750 Lbs.
• Size: 79" long x 67" wide x 91" high
Click
to Request a formal Quote with literature for this Milling Machine
|
JET JTM Vertical Milling Machine
Choose
from 9" x 42" or 9" x 49" or 10" x 50" Table
Choose from 1 phase or 3 phase Electrics
• Meehanite casting
• Precision bored and honed milling head
• Large diameter quill is chromed
• High precision Class 7 spindle bearings
• Spindle head is internally cooled
• Satin chrome finished dials
• Heavy-duty splined motor drive
• One-piece quill pinion and shaft
• Three-stage power downfeed with automatic stop
• Heavy-duty spindle brake
• Precision hardened and ground ways
• Precision ground table
• Adjustable gibs throughout
• Internal coolant tank built into base for optional coolant system
• One-shot lubrication system
• Way covers
• Draw bar
• Tool box with tools
• Tolerance test sheet included
• 2 Year warranty
Head
Movement: 90 degrees Right & Left, 45 degrees Front & Back
Distance Spindle to Column: 19" (max), 4.5" (minimum)
Max Distance Spindle to Table: 17-1/2 inches
Quill Diameter: 3-3/8
Quill Down feed Rates: .0015/.003/.006 inches/rev.
Spindle Taper: R-8
Spindle Travel: 5
Spindle Speeds: 8 with 1 phase, 16 with 3 phase
T-Slots Size: 5/8
Travel of Knee: 14-1/2 inches
JET Mills with 9 x 42 inch Tables:
JET
JTM-1: 2HP, 230 Volts, 3 phase Electrics
JET JTM-2: 2HP, 115/230 Volts, 1 phase Electrics
Travel of Ram: 13-3/8 inches
Table Cross Travel: 12-1/2 inches
Table Longitudinal Travel: 23-7/8 inches
Range of Spindle Speeds: 80 to 2720 rpm
Table Load Capacity: 550 Lbs.
Machine Weight: 2200 Lbs.
Click
to Request a formal Quote for this machine
JET
Mills with 9 x 49 inch Tables:
JET JTM-4VS-690182: 2HP, 115/230 Volts, 1 phase Elec.
JET JTM-4VS-690180: 2HP, 230 Volts, 3 phase Electrics
Range of Spindle Speeds: 60 to 4200 rpm
Travel of Ram: 13-3/8 inches
Table Cross Travel: 12-1/2 inches
Table Longitudinal Travel: 34 inches
Table Load Capacity: 660 Lbs.
Machine Weight: 2420 Lbs.
Click
to Request a formal Quote for this machine
JET
Mill with 10 x 50 inch Tables:
JET JTM-1050: 3HP, 230/460 Volts, 3 phase Electrics
Variable Spindle Speed: 70 to 3800 rpm
Travel of Ram: 20-1/2 inches
Table Cross Travel: 15-1/4 inches
Table Longitudinal Travel: 30 inches
Table Load Capacity: 720 Lbs.
Machine Weight: 2900 Lbs.
Click
to Request a formal Quote for this machine
|
Optional Equipment Available
• Electronic variable speed inverter drive
• Digital Readout
• Power air draw bar
• Coolant system w/ pump, nozzles and hoses
• Base coolant/chip drop pan
• Power feed table X-axis, installation included
• Power feed table Y-axis, installation included
• Power feed for knee up/down, installation included
• Riser Blocks
• Halogen work light
• Auto luber with alarm
• Anglock swivel vise
• 52 pcs clamping kit
• 11 pcs R8 collets set
• Phase converter for use with 1 phase electrics.
|
ACRA pre-equipped
Milling Machine
• FREE
SHIPPING to 48 states of USA
• DIGITAL READ OUT for X + Y axis, installed
• TABLE POWER FEED on X axis, installed
Model
BPV-2VC
.
Click
to Request more information about this mill
• 9" x 49" Table
• Variable Speed: 60 - 4300 rpm
• Electric Motor: 3HP, 220V or 440V, 3phase
• 90 degree left and right head swivel
with locks
•
45 degree front and back head tilt
•
Full 360 degree ram turret swivel
• Hardened & Ground X & Y Axis Slide Ways
• Hardened & Ground Work Table
• Ground Work Table Tee Slots
• Longitudinal X travel: 35" (33" powerfeed)
• Quill Travel: 5"
•
R-8 Spindle
•
Table capacity: 600 Lbs
• Machine weight: 2500 Lbs
•
Call 1-773-334-5000 to ask questions or place order
Model
BPV-3VC
.
Click
to Request more information about this mill
• 10" x 54" Table for heavy duty work
• Variable Speed: 60 - 4300 rpm
• Electric Motor: 3HP, 220V or 440V, 3phase
• 90 degree left and right head swivel
with locks
•
45 degree front and back head tilt
•
Full 360 degree ram turret swivel
• Hardened & Ground X & Y Axis Slide Ways
• Hardened & Ground Work Table
• Ground Work Table Tee Slots
• Longitudinal X travel: 38" (35" powerfeed)
• Quill Travel: 5"
• R-8 Spindle
•
Table capacity: 800 Lbs
•
Machine weight: 3500 Lbs
•
Call 1-773-334-5000 to ask questions or place order
|
TABLE
POWER FEED not shown
|
ACRA Combination
Horizontal-Vertical Milling Machine:
• Quality
made in Taiwan not China
• Castings made from genuine Meehanite
• Box knee ways are hardened and ground
• Box column ways
• Double box-type Turcite coated saddle ways
• Double table and knee locks
• Spring loaded handwheels for safety
• Precision hardened and ground table
• All controls located on moveable control pendant
• Designed for Accuracy, Longevity and Durability
• Flood coolant system with splash pan
• Longitudinal power feed with rapid transverse
• Rapid knee traverse
• Rear rubber way cover
• 1 Inch diameter horizontal arbor
• Two over arm supports
• One shot lubrication system
• Toolbox
X Axis Travel: 36"
Y Axis Travel: 16-1/2"
Z Axis Travel: 5" Quill
Ram Travel: 18-1/2"
Knee Travel: 17-1/2"
Throat Distance: 12-13/16"
Spindle Gauge-line to Table Top: 5-5/16"
Vertical Spindle Taper: NST #40
Vertical Speed (Variable Speed): 60-4500 RPM
Quill Feed (IPR): 0.0016, 0.003, 0.006
Horizontal Speed (6 Speeds): 80-1350 RPM
Horizontal Spindle Center to Table: 0" to 17-3/8"
Horizontal Spindle Center to Overarm: 5-1/2"
Horizontal Spindle Nose to Table: 15/16"
Head Tilt (right-left): 90°
Head Tilt (up-down): 45°
Vertical Motor: 5 HP, 220 or 440 Volts, 3 Phase
Horizontal Motor: 5 HP, 220 or 440 Volts, 3 Phase
Dimensions: 82" x 75" x 93"
Weight: 4200 Lbs.
|
Click
to Request a formal Quote with literature for this machine
|
Click for American
Machine Tools Homepage
|
