Metal cutting BandSaw Machines

Dake-Johnson SE-712 band saw on roller cart
Also works vertical by raising head up and installing table plate. 110 volts.
Click to request a Quote for the SE-712
Cutting Capacity:
@90 degrees: 7" Round, 12 x 7" Flat Bar
@45 degrees: 4" Round, 5.5 x 3.75" Flat Bar
Blade speeds: 85, 130, 180, 235 fpm.
Blade width: 3/4" // Motor: 3/4 HP @ 110 volts, 1 phase.
Hydraulic control of head down feed rate, coolant system, adjustable blade guides, chip brush blade cleaner, quick release vise that can swivel for angle cuts, and storage in a roller cart. Also works as a vertical bandsaw.
Our less expensive Rongfu brand version of this saw costs $1695.

Click to Request a Quote for the BS-250 & BS-260
Cutting Capacity:
@90 degrees: 8.75" Round, 10 x 4" Flat Bar
@45 degrees: 6.5" Round, 5.5" Square
Blade speeds: 66 to 280 fpm variable.
Blade width: 1"
Table height: 35"
* Hydraulically controlled cutting head feed
* Carbide and roller blade guides
* Head rotates to Miter up to 60° right
* Direct drive gear box
Click to see more Baileigh Band Saw machines

Dake TRAD-301 Swivel-head horizontal band saw
Heavy Duty. 220 volts, 3 phase.
Click to Request a Quote for the Trad-301
Cutting Capacity:
@90 degrees: 10" Round, 11.75 x 7" flat bar
@45 degrees: 7.5" Round, 7.5 x 6.5" flat bar
Blade speeds: 108 or 216 fpm.
Blade width: 1" // Motor: 1.3 or 2 HP
Table height: 37"
* Hydraulically controlled cutting head feed
* Carbide and roller blade guides
* Head rotates to Miter up to 60 degrees to the right
* Direct drive gear box
* Auto shut-off
* Infeed roller
* Measuring stop gauge
* Optional infeed & output roller tables

Rong Fu 1018-S Horizontal Band Saw:
Click to Request a Quote for the RF-1018-S
* Large size light duty metal cutting
* Cutting Capacity: 10" x 18 inches
* Blade Speeds: 114-196-228-377 feet per minute
* Blade Size: 1 x .035 x 121.66 inches
* Motor: 2 HP, 220 volts, 1 phase
* Cuts 10" round at 90 degrees and 6" round at 45 degrees
* Cuts 5" x 18" rectangle at 90 degrees and 6" x 9" at 45 degrees
* Miter cutting ability with swivel vise
* Centralized control panel on top of one piece saw bow
* Deluxe blade tension hand wheel
* Deluxe Tru-lock vise system with absolute clamping force
* Easy speed changes
* Heavy-duty all steel, one piece base
* Adjustable hydraulic down feed; just dial a feed rate on control panel
* Worm gear box has hardened and ground gears
* Quick-release vise for fast job changes
* Blade wheels have heavy-duty ball bearings
* Magnetic safety switch
* Automatic shut off
* Adjustable blade guide system

The Rong Fu 1018-S is made in Taiwan.

AMADA HA250W Automatic Horizontal Band Saw
Click to Request a Quote for Amada HA250W
Cutting Capacity Round (dia.): 0.5" - 10" [13 - 250mm]
Cut Capacity Rectangle (W x H): 12" x 10" [300 x 250mm]
Work Load Capacity: 3307 Lbs. [1500 kg]
Cutting Control: Oil pressure flow control valve
Main Split Vise and Rear Vise with hydraulic cylinders
Motors: Blade 5 HP, Hydraulic Pump 1 HP, Fluid Pump 1/4 HP
Electrics: 208/220/240V or 440/480 Volts, 3 phase, 60 Hz.
Features:
9 Times Multi-Indexing up to 141" * Chip Conveyor * Diagnostic Lights * Index Floating Vise * Kerf Compensating Dial * Motion detector * Piece Counter * Pressure Flow Valve * Split Vise * Variable Blade Speed Drive * Zero Clamp Vise
*A less expensive semi-automatic version is also available.
Options:
Roller tables, vertical clamps, vise pressure control

VERTICUT 280S (straight cut) & 280M (mitering)

Cutting Capacity @90 degrees: 11" Round
Cutting Capacity @45 degrees: 10" Round
Cutting Capacity @90 degrees: 9 high x 16" maximum width
Blade Width: 1"; Speeds: 65, 95, 140, 295, 280 feet/min
Max piece weight: 3000 Lbs.
Machine weight: 1350 Lbs.
Motor: 2 HP, 220 or 440 or 575 volts, 3 phase

280S: Mitre cuts up to 45 degrees by swiveling vise.

280M: Saw frame swings 45 degrees allowing mitre cutting without swinging the material. Saw frame cam locks with frame angle indicating scale. Hard stops at 0 and 45 degrees. Material discharge table built in conveyor with 5 rollers for material feed.

BOTH MACHINES: scissor type saw with heavy duty all welded design for rigidity and strength * flood coolant system with catch area built into the base * quick adjusting material clamp * blade guides are carbide faced with rollers to remove blade twist and dampen vibration * flood coolant system to both saw guides * steel wheels * heavy duty cast iron gear box designed for band sawing machines, with precision machined worm, phosphorous bronze worm gear, taper roller bearings and oil bath lubrication * magnetic motor starter with automatic shut off at the end of cut * cutting feed hydraulically regulated with quick shut off to avoid valve adjustments * CSA approved electrics. * High Quality made in Canada.
OPTIONS: Variable Speed Drive, 3 Phase Disconnect, Single Phase Power,Conveyor, Shipping Crate

Click for our Double Column Band Saw machines

VERTICUT 400M Band Saw
Click to Request a Quote for this machine
MANY HIGH END FEATURES:
* Heavy duty machine for intense cutting
* Scissor type saw with heavy duty all welded design for rigidity
* saw frame swings 45 degrees forward, 60 degrees to the rear allowing mitre cutting with out swinging the material, indicating scale showing cut angle, hard stops at +45 degrees, 0 degrees and -60 degrees
* hydraulic saw head lift and full stroke material clamp
* large base for stability with large coolant catch area
* pivot uses taper roller bearings for a highly rigid machine with smooth low friction movement
* control station mounted on a swinging console
* cutting feed hydraulically regulated with feed rate scale
* automatic shut off at end of cut, motor overload protection
* power disconnect on machine
* powered blade brush to remove cutting chips
* adjustable material length stop for repetitive cutting
* ductile iron wheels
* blade guides are carbide faced with rollers to remove blade twist and dampen vibration, internal coolant channel to lubricate guides and direct coolant onto blade
* flood coolant system to both saw guides with adjustable flow
* High Quality made in Canada
* Motor: 3 HP. Choose from 220 or 440 or 575 volts, 3 phase
* CSA / UL approved electrical components.
OPTIONS: 220V 1 Phase Power * Work Light * Extra Heavy Duty 5 hp motor with 1-1/4" blade * Conveyors * Heavy Shipping Crate

Max
Work
Height

Table
Size

Max
Table
Tilts

10"

15"
x
16"

5° Left
45°Right

Dake model 14-10
Made in USA.
Electrics: 110 volts.

Click to Request this Quote

29"
x
18"

Dake Work-A-Matic SXC
Vertical Band Saw

Automatic gravity feed
allows hand free operation.
Hydraulic feed regulator
to cut almost any metal.
110 volts electrics.
C-clamp assembly.
Made in USA.

Click to Request this Quote

Optional Casters

Vertical tiltable head double miter Bandsaw

VERTICUT:
The sawing head of this machine can tilt to miter cut up to 45° left and 45° right. Great for cutting structurals, pipe and tubing at 90° or 45° or compound angles.
High Quality made in Canada.
Features:
* Angle is adjustable
* Swivel vise for many angles
* Adjustable angle stops
* Separate feed controls
* Variable feed
* Powered chip brush
* Variable speed
* Hydraulic vises, left & right
* Coolant system
* Depth stop, light, lockout
* CSA./UL appd components
* Choose from 208/220 volts or 380 volts or 440/480 volts or 575 volts, 3 phase electrics

* OPTIONAL: 10 foot long Infeed and Output conveyors