JET J3410 HORIZONTAL BANDSAW

Click to Request a Quote for the Jet J3410
• Adjustable hydraulic feed system
• Automatic shut-off at end of cut
• Coolant pump, tank, motor, hose, nozzle, shut-off valve
• Side blade guides with eccentric shaft, ball bearing
• Rear blade guides ball bearings
• Heat treated drive gear with bronze worm gear in oil bath
• Heavy-duty cast iron saw head and table
• Oil bath hardened and ground worm gear
• Adjustable ball bearing blade guides
• Blade wheels are made of flanged cast iron
• Rapid acting swivel vise for mitering at 45°
• Saw base has wheels
• 3/4" bi-metal blade
• Adjustable material stop
* Cutting Capacity: 7" Round at 90°
* Round at 45 Degrees: 4-1/2" diameter
* Square at 90 Degrees: 7 inches
* Rectangle at 90 Degrees: 2 x 12" or 7 x 10.5 inches
* Blade Size: 3/4 x .035 x 93 inches
* Blade Speeds: 80, 130, 180, 265 feet per minute
* Bed Height: 23-1/2 inches
* Machine Weight: 380 Lbs.
* Motor: 3/4 HP, 115 Volts, 1 phase, only

JET HBS-814GS Geared Head HORIZONTAL BAND SAW

Click to Request a Quote for the Jet HBS-814GS
• Heavy duty geared head transmission fast speed changes
• Easy accessible control panel for operator use
• Hydraulic controlled down feed rate
• Portable on wheels
• Hardened and ground worm gears
• Quick action swivel vise miters at 45°
• Coolant system
• 3/4" Carbon steel blade with chip brush
• Adjustable material stop
* Cutting Capacity: 8" Round at 90 Degrees
* Round at 45 Degrees: 6-1/2 inches
* Square at 90 Degrees: 8 inches
* Rectangle at 90 Degrees: 8 X 14 inches
* Rectangle at 45: 2 x 7 inches
* Blade Size: 3/4 x .035 x 97 inches
* Blade Speeds: 135, 197, 256 feet per minute
* Bed Height: 26 inches
* Machine Weight: 444 Lbs.
* Motor 1 HP, 115/230V, 1 phase, Prewired 115Volts

JET J9225 8-3/4" ZIP MITER HORIZONTAL BANDSAW

Click to Request a Quote for the Jet J9225
• Adjustable hydraulic feed system
• Heavy duty cast iron saw head and sturdy base
• Mitering capability to 60°
• Convenient control panel
• Complete coolant system
• Hydraulic blade tension gauge
• Adjustable material stop
• Bi-Metal bendsaw blade
• Overload protection
• Quick Release Vise
* Cutting Capacity: 8-3/4" Round at 90°
* Round at 45 Degrees: 6-1/4" diameter
* Rectangle at 90 Degrees: 8-3/4 x 7 inches
* Square at 90 Degrees: 8-3/4 inches
* Blade Size: 1 x .035 x 96.5 inches
* Blade Speeds: 157, 314 feet per minute
* Bed Height: 38-7/16 inches
* Machine Weight: 542 Lbs.
* Motor 1.5 HP, 230 Volts, 3 phase only

JET J7020 10 x 16 HORIZONTAL BAND SAW

Click to Request a Quote for the Jet J7020
• Variable speed drive with easy fine adjustment
• Exclusive 6 contact point blade guide assemblies
• Exclusive swivel control panel
• One piece wheel cover
• Heavy duty transmission hardened&ground oil bath gears
• Adjustable blade guides with 6 point contact combination
• Swing away control panel
• Patented 3 jaw rapid action swivel vise
• Cast iron blade wheels
• Adjustable material stop
* Cutting Capacity: 10" Round at 90 Degrees
* Round at 45 Degrees: 10 inches
* Square at 90 Degrees: 10 x 10"
* Rectangle at 90 Degrees: 7 X 16"
* Rectangle at 45: 6-1/2 x 11"
* Blade Size: 1 X .035 X 135 inches
* Variable Blade Speeds: 100 - 350 feet per minute
* Bed Height: 23-1/2 inches
* Machine Weight: 1000 Lbs.
* Motor: 1.5 HP, 115/230V, 1 phase, Prewired 230Volts

• Optional Swivel Head Available:
for easy miter cutting.
• Optional Motor Available:
2 HP, 460 Volts, 3 phase

JET HBS-1018W 10 x 18 HORIZONTAL BANDSAW

Click to Request a Quote for the Jet HBS-1018W
• Large handwheel and built-in gauge for blade tensioning
• Coolant is distributed through the blade guides
• Blade guides with parallel double-row ball bearing support
• Blade brush is built-in and self-propelled
• Quick-position vise with adjustable jaws swivels to 45°
• Removable chip tray for quick clean-up
• Blade is fully guarded regardless of blade guide position
• Adjustable hydraulic downfeed with separate on/off valve
• Automatic shut-off after cut
• Carbide blade guides with rollers
• Coolant system
• 4/6 variable tooth bi-metal saw blade
• Adjustable material stop
* Cutting Capacity: 10" Round at 90 Degrees
* Round at 45 degrees: 7.5 inches
* Square at 90 degrees: 10 x 10 inches
* Rectangle at 90 degrees: 10 X 16" or 6 x 18"
* Rectangle at 45: 7-1/2 x 10"
* Blade Size: 1 X .035 X 130.5 inches
* Blade Speeds: 82, 132, 210, 330 feet per minute
* Bed Height: 23-1/2 inches
* Machine Weight: 801 Lbs.
* Motor: 2 HP, 230 Volts only, 1 phase

JET J7060 12 x 20 LARGE HORIZONTAL BAND SAW

Click to Request a Quote for the Jet J7060
• Variable speed drive system allows the operator to fine tune the blade speed fast and easily
• Exclusive swivel control panel
• Heavy duty transmission utilizes hardened and ground gears operating in an oil bath
• Balanced feed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
• Saw head raised hydraulically after each cut
• Cast iron band wheels
• Swing away control panel
• Exclusively patented 3 jaw vise allows for faster set up
• Exclusive 6 contact point adjustable blade guides (eccentric cam followers mounted on both sides of blade)
• Quick action swivel vise miters at 45°
• Coolant system
• Adjustable material stop
* Cutting Capacity: 12" Round at 90 Degrees
* Round at 45 degrees: 12 inches
* Square at 90 degrees: 12 x 12 inches
* Rectangle at 90 degrees: 12 x 20"
* Rectangle at 45: 12 x 12"
* Blade Size: 1 X .035 X 156 inches
* Variable Blade Speeds: 82 - 262 feet per minute
* Bed Height: 26-1/4 inches
* Machine Weight: 1500 Lbs.
* Motor: 3 HP, 230/460V, 3 phase, Prewired 230Volts

JET HBS-1321W 13 x 21 EXTRA LARGE BANDSAW

Click to Request a Quote for the Jet HBS-1321W
• Semi-automatic bow raises after cut is complete to predetermined height
• Adjustable rate hydraulic downfeed control
• Variable blade speed allows optimum cutting performance • Safety switch shuts off motor if band breaks
• Quick-positioning vise lessens set-up time
• Large handwheel and built-in gauge for blade tensioning
• Coolant is distributed through the blade guides
• Cleaning hose and nozzle assist in washing chips away
• Easy access chip tray allows quick cleanup
• Self-propelled blade brush extends the blade life
• Automatic shut-off after cut
• Carbide blade guides with rollers
• Coolant system
• 3/4 variable tooth bi-metal blade
• Adjustable material stop
* Cutting Capacity: 13" Round at 90 Degrees
* Round at 45 degrees: 10 inches
* Rectangle at 90 degrees: 13 x 18"
* Blade Size: 1-1/4 x .042 x 161-1/2 inches
* Variable Blade Speeds: 66 - 264 feet per minute
* Bed Height: 32 inches
* Machine Weight: 1519 Lbs.
* Motor: 3 HP, 230/460 Volts, 3 phase, Prewired 230V