COSEN
MH-270M
Manual Swivel Head Fast Mitering Bandsaw
FEATURES:
• Swivel saw frame for fast miter cutting capability adjustable
left cutting angle from 0 to 60 degrees.
• Coolant system.
• Quick clamping vise, equipped with quick short range sliding
device
• Blade tensioning system fitted with light indicator and fixed
screw for blade integrity checking
• Quick blade changeover with no need of tools
• Adjustable material stopper for mass-produced cuts
• Wire blade chip brush.
• Weight
of machine: 550 Lbs [250 Kgs]
• Size of machine: 53" x 28" x 52.2"
• Shipping size: [1365 x 720 x 750 mm].
You assemble the stand.
Click
to Request a Quote for the MH-270M
|
SPECIFICATIONS:
Round @ 0 degrees: 8.75" [225 mm]
Round @ 45 degrees: 5.75" [145 mm]
Round @ 60 degrees: 3.5" [90 mm]
Rectangular (HxW) @ 0 deg:
9.37" x 6" [240 x 150 mm]
Rectangular @ 45 degrees:
5.75" x 8" [145 x 210 mm]
Rectangular @ 60 degrees:
3.5" x 7" [90 x 180 mm]
Saw Blade Size:
97.64" x 1.06" x .035"[2480 x 27 x 0.9 mm]
Blade Speeds:
132 & 264 feet per minute [40 & 80 mpm] |
COSEN
MH-300DM
Manual Double Swivel Head Dual Mitering Bandsaw
FEATURES:
• Auto-cut band saw, Max cutting capacity at 10 inches [260
mm].
• Fast Miter cutting from 0° to 60° left and 0° to 45° right
• Start-button inside the operation handle
• 3-way Selector:
1. Manual cut
2. Rapid positioning of the saw-frame towards the material
3. Automatic cut with adjustable down-feed rate
• Adjustment of the blade tension from the front side of the
saw-frame, checked by a tension gauge
• Blade guides with metal pads
• Integrated coolant system
• Quick clamping vise, equipped with quick short range sliding
device, max capacity 11.5" [300 mm]
• Recede from two-support vise to increase cutting capacity
to 13" [330 mm].
• The Bearing Turn System on the swivel head of the machine
allows the saw-head to be turned by 2 fingers.
• Chips are easily cleaned with a removable tray.
• Weight
of machine: 704 Lbs [320 Kgs]
• Size of machine:53"x28"x52" [1350x715x1326mm]
Click
to Request a Quote for the MH-300DM
|
SPECIFICATIONS:
Round @ 0 degrees: 10.2" [260 mm]
Round @ +45 degrees: 9.45" [240 mm]
Round @ +60 degrees: 6.3" [160 mm]
Round @ -45 degrees: 7.5" [190 mm]
Rectangular (HxW) @ 0 deg:
11.6" x 9" [295 x 230 mm]
Rectangular @ 45 degrees:
8.9" x 8.5" [225 x 215 mm]
Rectangular @ 60 degrees:
6.3" x 5.1" [160 x 130 mm]
Rectangular @ - 45 degrees:
7.5" x 7.5" [190 x 190 mm]
Saw Blade Size:
116.7" x 1.06" x .035"[2965 x 27 x 0.9 mm]
Blade Speeds:
122 & 231 feet per minute [37 & 74 mpm] |
COSEN
MH-812LC
Manual Swivel Vise Mitering BandSaw
FEATURES:
Head does not swivel, only vise does
Heavy-duty hydraulic cylinder with precision ground hinge support
Cast iron quick set up vise
Pan shaped base with built-in coolant & hydraulic system
Blade Drive has 1 hp motor, heavy-duty reducer, & variable step
drive assembly
4-speed transmission with the best worm gear and shaft
Carbide blade guides with roller bearings
Two addtional bearings to support blade from the top
Integral coolant system
Blade brush Control & Automation
Down feed rate & cutting pressure control via hydraulic down feed
valve
Simplified control switches mounted on saw head
Cast iron vises
Secure clamping via dependable manual lead screw system
Anti-slip hand wheel
Orange alert safety design
Easy blade change with front access at waist level
Manual blade tension adjustment
Bi-metal saw blade
Tool box, leveling pads, and an additional wire brush
Operation & parts manual
Click
to Request a Quote for the MH-812LC
|
SPECIFICATIONS:
Round @ 0 degrees: 8" [200mm]
Square @ 0 degrees: 7" [180mm]
Rectangular @ 0 degrees:
7" x 11.4" [180 x 290mm]
Saw Blade Size:
107" x 1.06" x 0.035" [2720 x 27 x 0.9mm]
Blade Speeds:
49,80,129,217 fpm [15,24,39,66 m/min]
Table Height 630 mm (24.8")
Motor: Blade 1 HP, Coolant 1/8 HP
Weight of machine: 484 Lbs [220 kgs]
Size of machine:
56" x 24.5" x 45" [1450 x 625x 1145 mm]
Shipping size: 1475 x 762x 1220 mm |
COSEN
MH-916JRP
Manual Swivel Vise Mitering BandSaw
FEATURES:
Head does not swivel, only vise does
Heavy-duty hydraulic cylinder with precision ground hinge support
Cast iron quick set up vise
Pan shaped base with built-in coolant & hydraulic system
Carbide blade guides with roller bearings
Two exta bearings to support blade from the top
Rigid guide arms mounted on extra wide precision ground dovetail
slide
Integral coolant system
Blade brush
Down feed rate & cutting pressure control via hydraulic down feed
valve
Simplified control switches mounted on saw head
Cast iron vises
Secure clamping via dependable manual lead screw system
Anti-slip hand wheel
Protective conduit
Easy blade change with front access at waist level
Manual blade tension adjustment
Bi-metal saw blade
Tool box, leveling pads, an additional wire brush
Operation & parts manual
Click to
Request a Quote for the MH-916JRP
|
SPECIFICATIONS:
Round @ 0 degrees: 9" [230mm]
Square @ 0 degrees: 9" [230mm]
Rectangular (H x W) @ 0 degrees:
9" x 14.5" [230 x 370 mm]
Saw Blade Size:
132" x 1.06" x 0.035" [3350 x 27 x 0.9mm]
Blade Speeds:
82,127,186,300 fpm [25,39,57,92 m/min]
Motor: Blade 2 HP, Coolant 1/8 HP
Weight of machine: 902 Lbs [410 kgs]
Size of machine: 63" x 28" x 42.5"
Shipping size: 1700 x 787 x 1220 mm |
COSEN
MH-1016JA
Manual Swivel Vise Mitering BandSaw
FEATURES:
Available with hydraulic vise (SH-1016JA option)
Head does not swivel, only vise does
Heavy-duty hydraulic cylinder with precision ground hinge support
Cast iron quick set up vise
Large rugged base with built-in coolant & hydraulic system
2 hp motor, heavy-duty reducer, & variable step drive assembly
4-speed transmission with the best worm gear and shaft
Carbide blade guides with roller bearings
Two additional bearings to support blade from the top
Rigid guide arms mounted on extra wide precision ground dovetail
slide
Integral coolant system
Blade brush
Down feed rate & cutting pressure control via hydraulic down feed
valve
Conveniently designed control station at chest level
Cast iron vise
Secure clamping via dependable manual lead screw system
Anti-slip hand wheel
Easy blade change with front access at waist level
Bi-metal saw blade
Tool box, leveling pads, an additional wire brush
Operation & parts manual
Click to
Request a Quote for the MH-1016JA
|
SPECIFICATIONS:
Round @ 0 degrees: 10" [250 mm]
Square @ 0 degrees: 9" [230 mm]
Rectangular (H x W) @ 0 degrees:
9" x 14.5" [230 x 370 mm]
Saw Blade Size:
132" x 1.06" x 0.035" [3350 x 27 x 0.9mm]
Blade Speeds:
75,121,190,305 fpm [23,37,58,93 m/min]
Motor: Blade 2 HP, Coolant 1/8 HP
Table height: 25.6" [650mm]
Weight of machine: 950 Lbs. [432 kgs]
Size of machine:
66" x 28" x 70" [1680 x 710 x 1780 mm] |
COSEN
MH-1018JA
Manual Swivel Vise Mitering BandSaw
FEATURES:
Strong and powerful gearbox to bear the tension of the saw blade
Head does not swivel, only vise does
Tungsten carbide blade guide and guide bearing
Dovetail of saw blade guide
Fast clamping vise
Precise hydraulic blade downfeed
Automatic power off when cut is finished
Rigid base and cast bed
Coolant supply
Chip collector
Industrial coolant pump
Bi-metal saw blade
Tool box, leveling pads, an additional wire brush
Operation & parts manual
Click to
Request a Quote for the MH-1018JA
|
SPECIFICATIONS:
Round @ 0 degrees: 10" [250 mm]
Square @ 0 degrees: 9" [230 mm]
Rectangular (H x W) @ 0 degrees:
9" x 18" [230 x 460 mm]
Saw Blade Size:
138" x 1.06" x 0.035" [3505 x 27 x 0.9mm]
Blade Speeds:
95, 150, 213, 321 fpm[29,46,65,98 M/min]
Motor: Blade 2 HP, Coolant 1/8 HP
Table height: 25.6" [650mm]
Weight of machine: 950 Lbs. [432 kgs]
Size of machine: 68" x 29" x 41"
Shipping size: 1830 x 817 x 1160 mm |
BANDSAWS
FOR CUTTING STRUCTURAL STEEL, TUBING & PIPE
|
COSEN
MH-460M
Swivel Head Fast Mitering BandSaw
FEATURES:
Swivel sawhead mitering from 90 to 60 degrees
Specially designed heavy-duty cast iron swivel center
Large easy-to-read mitering scale
Large rugged base with built-in coolant return
Manual Blade Tensioning
Carbide blade guides with roller bearings
Two extra bearings to support blade from the top
Cast iron guide arm supported by heavy-duty cast iron dovetail
Integral coolant system
Blade brush
Down feed rate & cutting pressure control via hydraulic down feed
valve
Conveniently designed control station at chest level
Cast iron vises with replaceable extension plate
Secure clamping via manual lead screw system
Anti-slip handwheel
Adjustable material stop
Bi-metal saw blade
Tool box, leveling pads, and extra wire brush
Operation & parts manual
Available with optional semi-automatic hydraulic sawhead lift
after cutting is complete (SH-460M option)
Click
to Request a Quote for the MH-460M
|
SPECIFICATIONS:
Round @ 0 degrees:10" [250 mm]
Round @ -45 degrees:9" [230 mm]
Round @ -60 degrees: 4.3" [110mm]
Rectangular (H x W) @ 0 degrees:
9" x 18.1" [230 x 460 mm]
Rectangular @ -45 degrees:
9" x 9" [230 x 230 mm]
Rectangular @ -60 degrees:
9" x 4.3" [230 x 110 mm]
Saw Blade Size:
138" x 1" x 0.035" [3505 x 27 x 0.9mm]
Blade Speeds:
95, 150, 213, 321 fpm [29,46,65,98 m/min]
Motor: Blade 2 HP, Coolant pump 1/8 HP
Work bed height: 25.4" [645 mm]
Weight of machine: 1430 Lbs [650 kgs]
Size of machine: 55" x 74.8" x 66.9"
Shipping size: 1855 x 1220 x 1170 mm |
COSEN
MH-500M
Swivel Head Fast Mitering BandSaw
FEATURES:
Swivel saw frame is an ideal design for angle cutting. Due to
the design, the material remains in a safe clamped position. Angle
change can be made by moving bow. It is done without tools in a
matter of seconds.
Hydraulic feed flow control valve provides an infinite range of
cutting feed rate.
Blade tension indicator ensures the proper tension for a better
blade life and cutting performance.
Power blade brush cleans blade gullets that will give you of a
longer blade life, and increase cutting performance.
Rigid & well-welded structure for accuracy demand under heavy-cutting
loads.
High performance, simple operation and maintenance.
Economy & productivity reduce the manufacturing overheadsmore
profit rendered.
Complete coolant system.
The turning slide is using to enhance the supporting strength
of pivot knuckle.
Control Station is located at the left side of the machine. The
operator does not need to stretch out his hand across the cutting
area to control the machine.
Available with optional semi-automatic hydraulic sawhead lift
after cutting is complete (SH-500M option)
Click
to Request a Quote for the MH-500M
|
SPECIFICATIONS:
Round @ 0 degrees:13" [330 mm]
Round @ +45 degrees:11.5" [290 mm]
Round @ +60 degrees: 8.7" [220mm]
Rectangular (H x W) @ 0 degrees:
11" x 19.7" [280 x 500 mm]
Rectangular @ +45 degrees:
11" x 11" [280 x 280 mm]
Rectangular @ +60 degrees:
11" x 7.9" [280 x 200 mm]
Saw Blade Size:
163" x 1" x 0.035" [4150 x 27 x 0.9mm]
Blade Speeds:
75, 117, 166, 247 fpm [23,36,51,76 m/min]
Motor: Blade 2 HP, Hydraulic 1/2 HP, Coolant pump 1/8 HP
Work bed height: 32.3" [820 mm]
Weight of machine: 2178 Lbs [990 kgs]
Size of machine: 74" x 107" x 82"
Shipping size: 2260 x 1190 x 1700 mm |
COSEN
SH-600DM
Swivel Head Fast Dual Mitering Semi-automatic BandSaw
FEATURES:
Fast and easy swivel sawhead allows the user to cut at any angle
up to 60° in one direction. The precision pivot system provides
easy and accurate adjustment of cutting angle. Comes with a protractor
and angle pointer in clear view.
Rigid and heavy-duty pivot and trunion ensure long machine life.
The infinitely variable-speed blade drive is equipped with a worm
gear speed reducer. The worm shaft is hardened and ground. Together,
they provide quiet, powerful, and trouble-free drive.
The bearing guides eliminate blade stress by pre-aligning the
blade before it enters the carbide guides. Two additional guides
located on a central axis support the blade from the top, giving
it extra penetrating force for faster cuts.
Heavy-duty cast iron guide arms are rigidly supported by a large,
heavy-duty ductile cast iron dovetail to assure straight cuts and
eliminate vibration for longer blade life.
Automatic hydraulic blade tensioning device provides correct blade
tensioning when the machine is turned on and will reduce tension
when the machine is not running. This extends blade life. The on-off
hydraulic valve switch is an added feature making blade change quicker
and easier.
Integral coolant system. Coolant is supplied at many critical points:
exit & entry of blade through blade guides, middle of cut via adjustable
flex hose, and blade cleaning brush.
Synchronized
power driven blade brush cleans chips from blade to extend blade
life.
Dual
valve feed system gives optimal cutting performance. The operator
can easily pre-select the correct feed pressure and feed rate for
efficient cutting of any material.
The
operators control station located ergonomically on the front side
of the saw is convenient and user friendly. All operator controls
are positioned on the top of the control box and clearly labeled
for ease of operation. The electrical components are located inside
the control box with the main lockout disconnect on the front of
the control box for safety and easy maintenance.
Work
height selector. When the head automatically rises after cut-off,
the work height can be preset to allow the head to stop rising just
above the material. This feature saves time when repeat cutting
the same sizes.
Full
stroke machine vise. The machine vise incorporates a full stroking
cylinder with two guide columns to provide hydraulic clamping of
any material from the operators station.
Multiple
horizontal rollers located on the entry side of the saw for smooth
material feeding.
Click to
Request a Quote for the SH-600DM
|
SPECIFICATIONS:
Round @ 0 degrees: 13" [330 mm]
Round @ +/-45 degrees: 13" [330 mm]
Round @ -60 degrees: 11.8" [300mm]
Rectangular (H x W) @ 0 degrees:
13" x 23.6" [330 x 600 mm]
Rectangular @ +/-45 degrees:
13" x 16" [330 x 400 mm]
Rectangular @ -60 degrees:
13" x 11.8" [330 x 300 mm]
Saw Blade Size:
192" x 1.3" x 0.042" [4880 x 34 x 1.1mm]
Blade Speeds (variable):
66-330 fpm [20-100 m/min]
Motor: Blade 5 HP, Hydraulic 1 HP, Coolant pump 1/8 HP
Work bed height: 28.35" [720 mm]
Weight of machine: 3300 Lbs [1500 kgs]
Size of machine: 87.4" x 114" x 87"
Shipping size: 3020 x 1500 x 1650 mm
|
COSEN
SH-650M
Hydraulic Swivel Head Fast Mitering Semi-automatic BandSaw
FEATURES:
Swivel sawhead mitering from 90 to 60 degrees
Rigid and heavy-duty pivot and trunion
Sturdy cast work table
24.5" solid discharge table with coolant return
Variable speeds from 80 fpm thru 350 fpm
Infinitely variable blade speed (option)
Carbide blade guides with roller bearings
Two extra bearings to support blade from the top
Cast iron guide arm supported by heavy-duty cast iron dovetail
Automatic hydraulic blade tensioning device
Integral coolant system
Synchronized blade brush
Precision feed pressure & feed rate dual valve system
Conveniently designed control station
Electrical components located inside the control box with main
lockout disconnect
Work height selector
Industrial rated hydraulic components
24.5" solid discharge table with coolant return
36" infeed roller table
Ful stroke machine vises
Breakage breakage detector
Motor start interlock
Built-in adjustable material stop
Adjustable work light
Additional flushing hose
Bi-metal saw blade
Tool box, leveling pads, and an extra wire brush
Operation & parts manual
Click to
Request a Quote for the SH-650DM
|
SPECIFICATIONS:
Round @ 0 degrees: 16.5" [420 mm]
Round @ +45 degrees: 16" [400 mm]
Round @ +60 degrees: 10" [250mm]
Rectangular (H x W) @ 0 degrees:
15" x 25.6" [380 x 650 mm]
Rectangular @ +45 degrees:
16" x 16" [400 x 400 mm]
Rectangular @ +60 degrees:
16" x 10" [400 x 250 mm]
Saw Blade Size:
209" x 1.3" x 0.042" [5300 x 34 x 1.1mm]
Blade Speeds (variable):
66-330 fpm [20-100 m/min]
Motor: Blade 5 HP, Hydraulic 1 HP, Coolant pump 1/8 HP
Work bed height: 29.5" [750 mm]
Weight of machine: 3300 Lbs [1500 kgs]
Size of machine: 90.6" x 114" x 98.4"
Shipping size: 2920 x 2005 x 2110 mm |
COSEN
SH-700DM
Hydraulic Swivel Head Fast Dual Mitering Semi-automatic BandSaw
FEATURES:
Swivel sawhead mitering from 90 to 60 degrees; 45 degree to both
directions
Rigid and heavy-duty pivot and trunion
Sturdy cast work table
24.5" solid discharge table with coolant return
Variable speeds from 80 fpm thru 350 fpm
Infinitely variable blade speed (option)
Carbide blade guides with roller bearings
Two addtional bearings to support blade from the top
Cast iron guide arm supported by heavy-duty cast iron dovetail
Automatic hydraulic blade tensioning device
Integral coolant system
Synchronized blade brush
Precision feed pressure & feed rate dual valve system
Conveniently designed control station
Electrical components located inside the control box with main
lockout disconnect
Work height selector
Industrial rated hydraulic components
620 mm (24.5") solid discharge table with coolant return
915 mm (36") infeed roller table
Horizontal rollers enabling easy material entry
Ful stroke machine vises
Breakage breakage detector
Motor start interlock
Built-in adjustable material stop
Adjustable work light
Additional flushing hose
Bi-metal saw blade
Tool box, leveling pads, and an extra wire brush
Operation & parts manual
Click
to Request a Quote for the SH-700DM
|
SPECIFICATIONS:
Round @ 0 degrees: 17.7" [450 mm]
Round @ +/-45 degrees: 17.7" [450 mm]
Round @ +60 degrees: 11.8" [300mm]
Rectangular (H x W) @ 0 degrees:
17.7" x 27.5" [450 x 700 mm]
Rectangular @ +/-45 degrees:
17.7" x 20.5" [450 x 520 mm]
Rectangular @ +60 degrees:
17.7" x 11.8" [450 x 300 mm]
Saw Blade Size:
228" x 1.6" x 0.050" [5800 x 41 x 1.3mm]
Blade Speeds (variable):
66-330 fpm [20-100 m/min]
Motor: Blade 7.5 HP, Hydraulic 1 HP, Coolant pump 1/8 HP
Work bed height: 29.5" [750 mm]
Weight of machine: 5280 Lbs [2400 kgs]
Size of machine: 106.3" x 124" x 107"
Shipping size: 2690 x 1750 x 2110 mm |
COSEN
SH-700M
Double Column Hydraulic Swivel Head Fast Mitering Semi-automatic
BandSaw
FEATURES:
Rigid, oversized round columns precision ground to ensure smooth
and consistent feed rate
3.5 degree blade cant for longer blade life (7.5 degree available)
45 degree backward swivel with automatic angle lock-in
Heavy duty gearbox for smooth powerful cutting
Heavy duty inverter blade drive system
Carbide blade guides
Two extra guide bearings supports the blade
Automatic hydraulic blade tensioning device
Integral coolant system
Synchronized power driven blade brush
Independent control station
Infinitely variable blade speed control
Precision feed pressure & feed rate dual valve
"Last cut" or "keep on" selector switch
Work height selector
Extremely heavy-duty cast iron machines vises ensuring tight clamping
2 sets of full stroke cylinder vises
Shadow light projection for precise length measurement
Hydraulically powered lifting roller for easy material positioning
Proximity switch for sensing blade slippage or breakage
Electrical and hydraulic safety interlock
Blade "clip" device for easy blade change
Bi-metal saw blade
Tool box, leveling pads, and an extra wire brush
Operation & parts manual
Click to Request
a Quote for the SH-700M
|
SPECIFICATIONS:
Round @ 0 degrees: 19.7" [500 mm]
Round @ -45 degrees: 13.8" [350 mm]
Round @ -60 degrees: 7.9" [200mm]
Rectangular (H x W) @ 0 degrees:
15.7" x 27.6" [400 x 700 mm]
Rectangular @ -45 degrees:
18.5" x 13.8" [470 x 350 mm]
Rectangular @ -60 degrees:
19.7" x 7.9" [500 x 200 mm]
Saw Blade Size:
214.5" x 1.6" x 0.050" [5450 x 41 x 1.3mm]
Blade Speeds (variable):
82-312 fpm [25-95 m/min]
Motor: Blade 7.5 HP, Hydraulic 1 HP, Coolant pump 1/4 HP
Work bed height: 27.5" [700 mm]
Weight of machine: 7480 Lbs [3400 kgs]
Size of machine: 69" x 113.5" x 89"
Shipping size: 3200 x 2260 x 2235 mm |
COSEN
SH-710LDM
Double Column Hydraulic Swivel Head Fast Dual Mitering Semi-automatic
BandSaw
FEATURES:
This machine is a hydraulically controlled dual post bandsaw to
make straight cuts with easy mitering up to plus or minus 60 degrees
in both directions.
More information is available only if you click to request a formal
quotation.
Click
to Request a Quote for the SH-710LDM
|
SPECIFICATIONS:
Rectangular (H x W) @ 0 degrees:
16.5" x 28" [420 x 710 mm]
Rectangular @ +/-45 degrees:
16.5" x 18" [420 x 460 mm]
Rectangular @ +/-60 degrees:
16.5" x 11.8" [420 x 300 mm]
Saw Blade Size:
257.5" x 1.6" x 0.050" [6540 x 41 x 1.3mm]
Blade Speeds (variable):
83-330 fpm [25-100 m/min]
Motor: Blade 7.5 HP, Hydraulic 1 HP, Coolant pump 1/4 HP
Work bed height: 26.4" [670 mm]
Weight of machine: 6380 Lbs [2900 kgs]
Size of machine: 128" x 126" x 76" |
COSEN
SH-800DM
Hydraulic Swivel Head Fast Dual Mitering Semi-automatic BandSaw
FEATURES:
Precision ground, oversized round column design 10 degree blade
cant for longer blade life
Heavy duty, rigid saw frame supported by two large bore hydraulic
cylinders
Cross link connecting the two columns for enhanced structural
strength
45 degree forward & 60 degree backward swivel with automatic angle
lock-in
Specially designed planetary drive for smooth and powerful cutting
Heavy duty inverter blade drive system
Easy-to-read LED speed indicator
Hydraulically operated carbide blade guides
Two addtional guide bearings for extra support of the blade
Automatic hydraulic blade tensioning device
Hydraulically actuated guide arm
Integral coolant system
Synchronized power driven blade brush
Independent control station
Precision feed pressure & feed rate dual valve system
LED speed indicator
"Last cut" or "keep on" selector switch
Vise pressure detector
Hydraulically powered material infeed lift roller
Idle roller work table for material feeding
Light projection for precise length measurement
Full stroke double retracting vise
Full stroke cylinder vises
Proximity switch for sensing blade slippage or breakage
Electrical and hydraulic safety interlock
Blade "clip" device for easy blade change
Bi-metal saw blade
Tool box, leveling pads, and an extra wire brush
Operation & parts manual
Click
to Request a Quote for the SH-800DM
|
SPECIFICATIONS:
Round @ 0 degrees: 20" [500 mm]
Round @ +/-45 degrees: 17.7" [450 mm]
Round @ -60 degrees: 16" [400mm]
Rectangular (H x W) @ 0 degrees:
16" x 31" [400 x 800 mm]
Rectangular @ -45 degrees:
16" x 21" [400 x 550 mm]
Rectangular @ -60 degrees:
16" x 16" [400 x 400 mm]
Saw Blade Size:
260" x 2" x 0.050" [6600 x 54 x 1.3mm]
Blade Speeds (variable):
66-330 fpm [20-100 m/min]
Motor: Blade 7.5 HP, Hydraulic 3 HP, Coolant pump 1/2 HP
Work bed height: 42.7" [1085 mm]
Weight of machine: 9900 Lbs [4500 kgs]
Size of machine: 122.8" x 139" x 107"
Shipping size: 3655 x 2285 x 2515 mm |
