Tube, Pipe, Angle and Flat Bar Rolling & Bending Machines

Pipe, Tube, Angle, Channel & Flat Bar Rolling Machines
A+ Rating

Radius rolling of angle, channel, flat bar, and T-shapes is usually done on a pyramid style 3 roll bender. Tube and pipe can also be rolled but not to the small radius that can be repeatably and accurately done on a rotary mandrel draw bender machine using dies that match the tube/pipe size. Please remember that tube is measured at the outer diameter and pipe is measured at the inner diameter.

The pyramid roll bender machines for rolling pieces with a large radius come with a combination set of segmented rolls that can be used in different configurations to fit the shapes you are working with. Optional rolls may be needed to productively roll some shapes and all round shapes on the pyramid roll benders. When rolling angle iron, it helps to use optional lateral angle guide rolls to prevent twisting or you can try rolling 2 angles together that have been tack welded into a T-shape to compensate for possible twisting. Separate the 2 rolled angles when finished. But this reduces the angle size capacity.

The yellow Baileigh rotary draw bender machines are made in USA. The blue Baileigh roll bender machines are made in Portugal. The blue GMC machines are made in Taiwan (not China).
Round Pipe and Round Tubing are not the same thing. Pipe is listed by the nominal (approximate) inside diameter but tubing is listed by the exact outer diameter. For some pipe bender machines you can also buy or make die sets to bend Square Tubing, Angle Iron, etc.

Outer Diameter of schedule 40 Pipe for Reference:
1/4 inch pipe = 0.540 inch outer diameter
3/8" pipe = 0.675" outer diameter
1/2" pipe = 0.840 outer diameter
3/4" pipe = 1.050 outer diameter
1" pipe = 1.315 outer diameter
1-1/4" pipe = 1.660 outer diameter
1-1/2" pipe = 1.900 outer diameter
2" pipe = 2.375 outer diameter
2-1/2" pipe = 2.875 outer diameter
3" pipe = 3.500 outer diameter
4" pipe = 4.500 outer diameter
5" pipe = 5.563 outer diameter

Economical GMC Roll Bender Machines for radius rolling of flat bar, angle, channel, square tubing, etc.
2 Bottom Rolls are Driven // Rolls are Hardened // Cast Iron Frame // Includes a Set of Standard Rolls // Adjustable Side Guide Rolls // Overload Protection // Foot pedal control
Options available: * Rolls for round shapes. * Nylon rolls to prevent from marking up your parts.

Image of Flat Bar Bending Machine

Model: PRB-55:
Cannot be used horizontally.
Diameter of rollers: 2"
Roller speed: 13 rpm
Motor: 3 HP, 220 Volts,1 phase
Dimensions: 40 x 35 x 65"
Weight: 1050 Lbs
Optional hydraulic top roll & DRO costs extra.
Click to request complete price and info

Picture of GMC Pipe and Tube Roll Bender Machine model PRB-65
Model: PRB-65:
with push button hydraulic powered top roll positioning and digital readout.
Cannot be used horizontally.
Diameter of rollers: 2.5"
Roller speed: 10 rpm
Motor: 3 HP, 220 Volts,3 phase
Dimensions: 50 x 45 x 71 inches
Weight: 2110 Lbs.
Click to request complete price and info

AKYAPAK AK-Bend Roll Bender Machines are very high quality radius rolling machines from Turkey with more sophisticated features than other machines. The APK-61 and APK-81 machines have digital readouts on both of the moveable bottom rolls. All 3 rolls are driven and push button activated. They are also available with NC Control and programmable CNC control for frequent repeat work. All Akyapak machines can be used vertically for small radius work or horizontally for large radius work.

AKYAPAK APK-61 Ring Rolling Machine
Click to request the Quote be sent to you
* The machine works vertically or horizontally.
* Moveable Control Panel Stand instead of foot pedals
* Lower rolls hydraulically move up and down with push buttons
* Digital readout display for repeat positioning of each lower roll

MAXIMUM CAPACITIES:
Flat Bar (Easy Way): 4" x 1/2" @ 20" diameter minimum
Flat Bar (Easy Way): 2" x 1" @ 55" diameter min.
Flat Bar (Hard Way): 3/4" x 3" @ 48" diameter min.
Solid Round Rod: 75" diameter @ 16" diameter min.
Solid Square: 1.5" diameter @ 32" diameter min.
Tubing Round: 1" x .06 wall @ 12" dia min.(need optional rolls)
Tubing Round: 2.5" x .078 wall @ 64" dia min.(optional rolls)
Pipe: 2" schedule 40 @ 40" dia min.(optional rolls)
Pipe: 3/4" schedule 40 @ 12" dia min.(optional rolls)
Rectangular Tube: 3" x 1" x .12 wall @ 266" diameter min.
Square Tube: 2" (.125 wall) @ 157" diameter min.
Angle Iron (Leg Out): 2 x 2" x 1/4" @ 40" diameter min.
Angle Iron (Leg In): 2.5 x 2.5" x 3/8" @ 40" diameter min.
Channel: C3 x 5 Lbs/ft (1.50 flange) @ 36" dia min.

SPECIFICATIONS:
5.4 HP Motor. 6.97" dia rolls. Machine Weight:2140 Lbs

Radius Rolling Machine - Akyapak model APK61

OPTIONS: NC or CNC Control * Hydraulic Angle Guides * Special Rlls for pipe or other shapes *Spiral bending device *Variable speed

AKYAPAK APK-81 Radius Bending Machine
Click to request the Quote be sent to you
* The machine works vertically or horizontally.
* Moveable Control Panel Stand instead of foot pedals
* Lower rolls hydraulically move up and down with push buttons
* Digital readout display for repeat positioning of each lower roll
* Angle Roll Guides to prevent twisting when bending angle iron

MAXIMUM CAPACITIES:
* Flat Bar (Easy Way): 5" x 1.25" @ 40" diameter minimum
* Flat Bar (Hard Way): 3" x 1" @ 83" diameter min.
* Solid Round Rod: 1.75" diameter @ 20" diameter min.
* Tubing Round: 4"x .09 wall @ 118" dia min.(optional rolls)
* Tubing Round: 1.5"x .07 wall @ 16"dia min.(optional rolls)
* Pipe: 3" schedule 40 @ 63" dia min.(optional rolls)
* Pipe: 1.5"schedule 40 @ 18" dia min.(optional rolls)
* Rectangular Tube: 4" x 1" x .12 wall @ 118" diameter min.
* Square Tube: 2.5" (.157 wall) @ 118" diameter min.
* Angle Iron (Leg Out): 3 x 3" x 3/8" @ 78" diameter min.
* Angle Iron (Leg Out): 1.25" x 1.25" x 1/8" @ 20" diameter min.
* Angle Iron (Leg In): 3 x 3" x 3/8" @ 78" diameter min.
* Angle Iron (Leg In): 1.5 x 1.5" x 1/8" @ 24" diameter min.
* Channel: C3 x 5 Lbs/ft (1.50 flange) @ 36" dia min.
Also bend 3" T-bar and W5 I-Beams. Click for Video of APK-81

SPECIFICATIONS:
6.8 HP Motor.
9.6" diameter rolls.
3.15" diameter shafts.
Machine Weight:3285 Lbs

Radius Rolling Machine - Akyapak model APK81

OPTIONS: NC or CNC Control * Hydraulic Angle Guides (shown in photo) * Special Rlls for pipe or other shapes * Spiral bending device * Variable speed

AKYAPAK APK-101 Radius Rolling Machine
Click to request the Quote be sent to you
* The machine works vertically or horizontally.
* Moveable Control Panel Stand instead of foot pedals
* 3 Rolls driven by hydraulic motor+planetary gearbox & gears
* Push button hydraulically moveable lower rolls up and down
* Digital display for lower rolls for repeat positioning
* Shafts are made of special steel, hardened and ground
* Guide rolls are adjustable manually in one direction
* Welded steel construction * One set standard rolls included

MAXIMUM CAPACITIES (examples):
* Flat Bar (Easy Way): 6" x 1.25" @ 40" diameter minimum
* Flat Bar (Hard Way): 4" x 1" @ 63" diameter min.
* Solid Round Rod: 2.75" diameter @ 32" diameter min.
* Tubing Round: 5" x .12 wall @ 118" dia min.(optional rolls)
* Tubing Round: 2" x .07 wall @ 24"dia min.(optional rolls)
* Pipe: 4" schedule 40 @ 63" dia min.(optional rolls)
* Pipe: 2"schedule 40 @ 18" dia min.(optional rolls)
* Rectangular Tube: 5" x 1.5" x .12 wall @ 157" diameter min.
* Square Tube: 4" (.105 wall) @ 157" diameter min.
* Angle Iron (Leg Out): 4x 4" x 3/8" @ 55" diameter min.
* Angle Iron (Leg Out): 2" x 2" x 1/4" @ 28" diameter min.
* Angle Iron (Leg In): 4 x 4" x 3/8" @ 63" diameter min.
* Angle Iron (Leg In): 2 x 2" x 1/4" @ 32" diameter min.
* Channel: C7 x 12.25 Lbs/ft (2.19 flange) @ 32" dia min.
NOTE: For some shapes, special rolls, pulling device, stretching device or angle rolling device will be needed to get good results.

SPECIFICATIONS:
* 15 HP Motor.
* 12.4 inch diameter rolls.
* 3.94 inch diameter shafts.
* Machine Weight:4940 Lbs

Angle Roll Machine - Akyapak AK Bend model APK101

OPTIONS: Special rolls and tooling for bending pipe or some of the shapes * Spiral bending device * Variable speed of rotation * Hydraulically adjustable guide rolls in two directions (shown in photo) * Digital display for hydraulic guide rolls * NC PIayback Control System * CNC Graphic Control System

AKYAPAK APK-121 Radius Rolling Machine
Click to request the Quote be sent to you
* The machine works vertically or horizontally.
* Moveable Control Panel Stand instead of foot pedals
* 3 Rolls driven by hydraulic motor+planetary gearbox & gears
* Push button hydraulically moveable lower rolls up and down
* Digital display for lower rolls for repeat positioning
* Shafts are made of special steel, hardened and ground
* Guide rolls are adjustable manually in one direction
* Welded steel construction * One set standard rolls included

MAXIMUM CAPACITIES (examples):
* Flat Bar (Easy Way): 8" x 2" @ 40" diameter minimum
* Flat Bar (Hard Way): 5" x 1" @ 60" diameter min.
* Solid Round Rod: 3.37" diameter @ 36" diameter min.
* Solid Square: 3" x 3" @ 32" diameter min.
* Tubing Round: 6" x .157 wall @ 118" dia min.(optional rolls)
* Tubing Round: 2" x .75 wall @ 24"dia min.(optional rolls)
* Pipe: 5" schedule 40 @ 70" dia min.(optional rolls)
* Rectangular Tube: 5.5" x 2" x .196 wall @ 157" diameter min.
* Square Tube: 3.5" (.312 wall) @ 157" diameter min.
* Angle Iron (Leg Out): 4 x 4" x 3/8" @ 43" diameter min.
* Angle Iron (Leg Out): 5" x 5" x 1/2" @ 52" diameter min.
* Angle Iron (Leg In): 3 x 3" x 5/16" @ 35" diameter min.
* Angle Iron (Leg In): 4 x 4" x 1/2" @ 44" diameter min.
* Channel: C8 x 22.8 Lbs/ft (3.50 flange) @ 47" dia min.
* Wide Flange Beam: W6 x 16 Lb/ft @ 102" dia min.
NOTE: For some shapes, special rolls, pulling device, stretching device or angle rolling device will be needed to get good results.

SPECIFICATIONS:
20 HP Motor. 15.35" diameter rolls. 4.72 inch diameter shafts. Machine Weight:10,405 Lbs.

Angle Rolling Machine - Akyapak AK Bend model APK101

Profile Radius Bending Machine: Akyapak AK Bend model APK-180

MAXIMUM CAPACITIES (examples):
* Flat Bar (Easy Way): 10" x 2" @ 40" diameter minimum
* Flat Bar (Hard Way): 6" x 1.5" @ 70" diameter min.
* Solid Round Rod: 4.37" diameter @ 55" diameter min.
* Solid Square: 3.5" x 3.5" @ 45" diameter min.
* Tubing Round: 7" x .25 wall @ 85" dia min.(optional rolls)
* Pipe: 6" schedule 40 @ 85" dia min.(optional rolls)
* Square Tube: 5" x 5" (.312 wall) @ 157" diameter min.
* Angle Iron (Leg Out): 6" x 6" x 5/8" @ 85" diameter min.
* Angle Iron (Leg In): 5" x 5" x 5/8" @ 85" diameter min.
* Channel (easy way): C12 x 30 Lbs/ft (3.17 flange) @ 40" dia min.
* Channel (hard way): C7 x 12.25 Lbs/ft (3.17 flange) @ 350" dia min.
* Wide Flange Beam (easy way): W8 x 31 Lbs/ft @ 45" dia min.
* Wide Flange Beam (hard way): W6 x 16 Lbs/ft @ 120" dia min.
NOTE: For some shapes, special rolls, pulling device, stretching device or angle rolling device will be needed to get the results shown. Consult an American Machine Tools Company engineer for more information.

AKYAPAK APK-180 Radius Rolling Machine
Click to request the Quote be sent to you
* This machine works horizontally only.
* Includes Moveable Control Panel Stand
* 3 Rolls driven by hydraulic motor+planetary gearbox & gears
* Push button hydraulically moveable lower rolls up and down
* Digital display for lower rolls for repeat positioning
* Shafts are made of special steel, hardened and ground
* Guide rolls are adjustable manually in one direction
* Welded steel construction
* One set standard rolls included.

SPECIFICATIONS:
20 HP Motor.
18.11" diameter rolls.
7.1 & 6.3 inch diameter shafts.
Machine Weight:20,400 Lbs.

BAILEIGH imports high quality radius rolling machines from Portugal. The portable RM-20 is for rolling small parts to a small radius. The models RM-40 and RM-55 are good for bending and rolling small parts. For frequent users, the hydraulic RH45, H55 and H85 machines adjust the bending radius via push buttons and they have a digital readout showing the up-down position of the bending roll to help repeat your work. On the RH85, RH120 and RH150, both bottom rolls move up and down instead of the top roll, so there are 2 digital readouts. To prevent slippage, all 3 rolls are driven on the RH45 thru RH150. Baileigh machines RM40 - RH150 can be used vertically or horizonatlly.

BAILEIGH RM20 Roll Bender Machine * Portable: The head of the RM20 can be removed from the stand for portable job site use. * Rolls are close togther for small radius bending. * Ratcheting top roll adjustment * Shafts are hardened steel * Rolls are hardened and ground steel. * Hardened Rolls for standard flat profiles included. * Rolls for round shapes are optional. * Bottom 2 rolls are powered by electric motor controlled by forward & reverse foot pedals. * Electrical: 110Volts,1phase or 220V,3phase Capacities: Pipe: 1/2" schedule 40 x 14" dia Round Tube: 1" x .06 x 16" dia Square Tube: 3/4" x .06 x 12" dia Solid Round: 1/2" x 6" dia. Flat Bar Easy Way: 1.5" x 12" dia Flat Bar Hard Way: 1" x 12" dia Angle Iron: 3/4 x 3/4" x 10" dia Click to request the Quote be sent to you	SPECIFICATIONS: Shaft diameters: .78" Roll diameters: 3.38" Machine Weight: 420 Lbs.
BAILEIGH RM-40 Roll Bender Machine for large radius rolling of Pipe, Tube, Angle, Channel, flat bar, etc. * Ratcheting top roll adjustment * Cast frame . * Shafts are hardened steel * Rolls are hardened and ground steel. * Hardened Rolls for standard flat profiles included. * Rolls for round shapes are optional. * Made in Europe * Bottom 2 rolls are powered by electric motor controlled by forward & reverse foot pedals. Capacities: Flat Bar (Hard Way): 2" x 3/8" @ 10" Radius Min Flat Bar (Easy Way): 2" x 3/8" @ 10" Radius Min Solid Round Rod: 1.25" @ 24" Radius Min. Solid Square Rod: 1.25" @ 24" Radius Min. Round Tube: 4” x .09 wall @ 47.24” radius Schedule 40 Pipe: 1" @ 14" Radius Min Rect Tube: 1.5" x 1.5" x 14 ga @ 20" Radius Min Square Tube: 2 3/4” x 1/8 wall @ 51.18” radius Angle Iron: 1.5" x 1.5" x 3/16" @ 10" Radius Min.	RM-40 (the top half of this machine can tilt back 90 degrees for horizontal use) Click to request the Quote be sent to you SPECIFICATIONS: Shaft Diameters: 1.25" Roll Diameters: 5.83" Shaft Speeds: 10 to 21 rpm Electronics: 1 HP, 220 Volts,1 phase, 60Hz
Baileigh RM-55 shown with manual adjustment of top roll (push button hydraulic adjustment of top roll position with digital readout is optional). Machine can be used vertically or horizontally. Shaft Diameters:1.968" Roll Diameters: 5.83" Shaft Speed: variable 13 to 27 rpm Capacities: Flat Bar Hard Way: 2" x 1/2" @ 16" Radius Min. Flat Bar Easy Way: 4.5" x 3/4" @ 16" Radius Min. Angle Iron Leg Out: 2" x 2" x 1/4" @ 24" Radius Min. Angle Iron Leg In: 2" x 2" x 1/4" @ 24" Radius Min. Tubing - Round: 2.25" x .078" @ 24" Radius Min Tubing - Square: 1.75" x .078" @ 24" Radius Min. Schedule 40 Pipe: 1.5" @ 20" Radius Min. Solid Round: 1.25" @ 24" Radius Min. Solid Square: 1.25" @ 24" Radius Min. Channel: 2" @ 24" Radius Min. Electrics: Weight: Machine size (l x w x h):	Click to request the Quote be sent to you Optional Accessories: * Rolls for Pipe, Tube, Profiles, and High volume Angle Bending * Special Lateral Angle Guides
Baileigh RH-45 has push button hydraulic adjustment of top roll position with digital readout* All 3 rolls are powered by forward/reverse foot pedals. * Machine can be used vertically as shown or horizontally. * Standard flat rolls included. * Control Console included. * Guide Rollers. * Side Guide Rollers. * Brake motor equipped. Shaft Diameters: 1.77" Roll Diameters: 6.37" Shaft Speed: 12 rpm Capacities: Flat Bar Hard Way: 3 x 3/8" @ 14" Radius Min Flat Bar Easy Way: 4" x 3/4" @ 14" Radius Min. Angle Iron Leg Out: 2 x 2 x 1/4" @ 14" Radius Min Angle Iron Leg In: 2" x 2" x 1/4" @ 14" Radius Min Tubing - Round: 2" x 14 ga. @ 20" Radius Min. Tubing - Square: 2" x 3/32 @ 26" Radius Min. Schedule 40 Pipe: 1-1/2" @ 20" Radius Min. Channel: 4" @ 16" Radius Min Electrics: 220 volts, 1 phase, 3 HP Weight: 1200 Lbs Machine size (l x w x h): 48" x 31" x 57"	Click to request the Quote be sent to you Optional Accessories: * Rolls for Pipe, Tube, Profiles, and High volume Angle Bending * Special Lateral Angle Guides
Baileigh RH-55 has push button hydraulic adjustment of top roll position with digital readout * All 3 rolls are powered by forward/reverse foot pedals. * Machine can be used vertically as shown or horizontally. * Standard flat rolls included. * Control Console included. * Guide Rollers. * Side Guide Rollers. * Brake motor equipped. Shaft Diameters: 2.165 Roll Diameters: 6.69 Shaft Speed: 11 rpm Capacities: Flat Bar Hard Way: Flat Bar Easy Way: Angle Iron Leg Out: 3 x 3 x 3/16"@16" Radius Min Angle Iron Leg In: 3 x 3 x 3/16"@ 16" Radius Min Tubing - Round: 3" x 16 ga. @ 32" Radius Min. Tubing - Square: 2-3/8" x 1/8 @ 51" Radius Min. Schedule 40 Pipe: 2.5" @ 29" Radius Min. Channel: 4-1/2" @ 17" Radius Min Electrics: 220 volts, 3 phase, 5 HP Weight: 1630 Lbs. Machine size (l x w x h): 51" x 35" x 62"	Click to request the Quote be sent to you Optional Accessories: * Rolls for Pipe, Tube, Profiles, and High volume Angle Bending * Special Lateral Angle Guides
BAILEIGH RH85 Pyramid Roll Bending Machine for large radius rolling of Pipe, Tube, Angle, Channel, flat bar, etc: * All 3 Rolls are Powered * Steel Frame Construction * Standard Combo Rolls for flat shapes included * Alloy steel Rolls & Shafts * Rolls are Hardened and Ground * Horizontal or Vertical Working Positions * Brake Motor equipped * Mobile Control Panel * 3-Axis Mechanical Lateral Angle Guide Rolls * Digital Read-Outs showing up-down movement of both lower rolls. Great for repeat work. Options: Pipe, Tube and Profile Bending Rolls Capacities: Mild Steel Max. Size OD/Wall Min. Dia. Flat Bar (Hard Way): 3” x 1/2" @ 27.55" radius Flat Bar (Easy Way): 5" x 1" @ 23.62" radius Solid Square Rod: 1 3/4" @ 19.68" radius Solid Round Rod: 2" @ 19.68" radius Round Tube: 4" x .09 wall @ 47.24" radius Pipe: 3" Sched 10 @ 27.55” radius Rect Tube: 3 x 1" x 1/8 wall @ 31.49" radius Square Tube: 2 3/4" x 1/8 wall @ 51.18" radius Angle Iron (Leg Out): 3 x 3" x 5/16 @31.49" radius Angle Iron (Leg In): 2 3/4 x 2 3/4 x 1/8 @27.55" T-Bar (Leg Out): 2 3/4 x 5/16 @ 31.9" radius T-Bar (Leg In): 3 x 5/16 @ 31.49" radius Channel (Legs Out): 4 3/4" x 2" @ 23.62" radius Channel (Legs In): 4" x 2" @ 19.68" radius I Beam (Hard Way): 4 3/4" x 2 1/4" @ 23.62" rad.	RH-85 Click to request this Quote be sent to you SPECIFICATIONS: Shaft Diameters: 2.75" Roll Diameters: 9.64" Shaft Speeds: 8 rpm Hardened Rolls for standard profiles included Hydraulic adjustment of bottom rolls up or down - independently Electronics: 4 HP, 220 Volts,3 phase, 60Hz Weight: 3,300 lbs. Dimensions (l x w x h): 56" x 38" x 52"
BAILEIGH RH120 Pyramid Roll Bending Machine for large radius rolling of Pipe, Tube, Angle, Channel, flat bar, etc: Click to request the Quote be sent to you * All 3 Rolls are Power driven * Steel Frame Construction * Standard Combo Rolls for flat shapes included * Alloy steel Rolls & Shafts * Alloy steel Rolls and Shafts hardened & ground * Horizontal or Vertical Working Positions * Brake Motor equipped * Mobile Control Panel * 3-Axis Mechanical Lateral Angle Guide Rolls * Digital Read-Outs show up-down movement of both lower rolls! Options: Pipe, Tube and Profile Bending Rolls Capacities: Pipe: 4.5" schedule 40 @ 73" diameter Round tube: 5.5" x .120" thick wall @ 118" diameter Square tube: 4" x .196" thick wall@ 118" diameter Angle iron: 4 x 4" x 3/8" @ 63" diameter Solid square: 2.375" @ 40" diameter Solid round: 2.75" @ 32" diameter Flat bar - Easy way: 7.87" x 1.37" thick @ 40" dia. Flat bar - Hard way: 4" x 1" @ 63" diameter	RH-120 Roll adjustment is push button hydraulic Shaft diameter: 3.937" Roll diameters Upper & Lower: 12.40" Speeds: (2) 5 rpm, 4 rpm Motor: 15 HP, 220 volts, 3 phase Shipping dimensions (L/W/H): 63" / 58" / 71" Shipping weight: 4,975 Lbs
BAILEIGH RH150 Pyramid Roll Bending Machine - Our biggest for large radius rolling of Pipe, Tube, Angle, Channel, flat bar, etc: Click to request the Quote be sent to you * All 3 Rolls are Power driven * Steel Frame Construction * Standard Combo Rolls for flat shapes included * Alloy steel Rolls and Shafts hardened & ground * Horizontal or Vertical Working Positions * Brake Motor equipped * Mobile Control Panel * 3-Axis Mechanical Lateral Angle Guide Rolls * Digital Read-Outs show up-down movement of both lower rolls! Options: Pipe, Tube and Profile Bending Rolls Capacities Pipe: 5.5" schedule 40 @ 73" diameter Round tube: 6.25" x .120" thick wall @ 118" dia. Square tube: 4" x .196" thick wall@ 118" diameter Angle iron: 4-1/2 x 4-1/2" x 1/2" @ 60" diameter Solid square: 3" @ 32" diameter Solid round: 3.38" @ 36" diameter Flat bar - Easy way: 7.87" x 2" thick @ 40" dia. Flat bar - Hard way: 5.5" x 1" @ 118" diameter	RH-150 Roll adjustment is push button hydraulic Shaft diameter: 4.724" Roll diameters Upper & Lower: 15.354" Speeds: 3.25 rpm Motor: 20 HP, 220 volts, 3 phase Shipping dimensions (L/W/H): 79" / 59" / 80" Shipping weight: 10,400 Lbs

Small Radius Pipe & Tube Bending: Rotary Draw Benders have the advantage of being able to form a smaller radius than 3 roll pyramid type machines (show at the top of this webpage). Though both types of machines require different dies each size of pipe or tube, draw type machines require a different die set for each radius you are trying to form. 3 roll pyramid type machines can form many different radii as long as each radius is large but require more skill to repeat the same radius, which is why rotary draw type madrel style machines are great if you have to form multiple parts of the same radius. Die sets are interchangeable on all RMD benders. All die sets are color coded for easy identification (green for pipe, blue for tube, and gray for square). Bend Material: Round or square tubing, pipe, flat stock, angle iron, or solid rod. Custom dies available Fast change over of dies without tools. Note that the dies for these machines are selected to fit the tube or pipe size AND the size of the desired Center Line Radius. Angle Finder Bend Degree Indicator: Indicator accurately detects where plane of bend is within the 360 degree rotation. Fits from 1" OD to 3" OD. $99 with any machine purchase.
EDWARDS 10 Ton Pipe/Tube Bender : Click to Request our quote for this machine Call 773-334-5000 to order this machine. Mon - Fri 9 - 5 * Operates Horizontal or Vertically * 180 Degree Bend Capacity * Easy To Use Hand Controls * Auto Stop Feature For Repeatable Bends * Heavy Duty Rolling and Locking Stand * Quick Disconnect Hoses * Heavy Duly All Steel Construction * 2" (10) Schedule 40 Pipe Capacity * 2-1/2" (00) .095" Tube Capacity * 2-1/4" .083" Chromoly Capacity * Die Sets Sold Separately * Stroke: 14" Electric Motor Std: 5 HP, 3 Phase, 20B/240Volts, 14 amp Electric Motor Options: 440/480 V, 575V, 3 phase, 7 amp; or 1 Phase, 220 Volts, 26 amps Hydraulic Pump: 3-1/2 gpm-single stage@3000 psi max.	Head can pivot for horizontal use. Ironworker Powerlink or Hydraulic Pump Needed.
RDB-100 Manual Ratcheting Tube and Pipe Bender: Call 773-334-5000 to order this machine. Mon - Fri 9 - 5 Capacity is up to 1" schedule 40 Pipe, 1" square tubing, 1-1/2" Chromolly (up to .083 wall), up to 1-3/4" tube (.095 wall mild steel). Unique ratcheting mechanism allows you to bend by simply pulling a lever. Each pull will deliver up to 10 degrees of movement. No Pins to move or re-engaging to reach 206 degrees; this is accomplished by the anti-reverse stop latch. Bends pull out in seconds (no disassembly required). Maximum bend radius is 7" (depending on wall thickness, and material). Quick release counter die improves production time. Highly visible degree dial improves accuracy. Weight: 250 Lbs. Made in USA.
RDB-125 Hydraulic Rotary Draw Bender: made in USA Click to Request our quote for this machine Our lowest price powered pipe and tube bending machine. Capacities: Mild Steel or Aluminum schedule 40 Pipe: 2" Stainless Steel schedule 40 Pipe: 1.5" Mild Steel Round Tube: 2.5" x .125 wall Aluminum Round Tube: 2.5" x .156 wall Stainless Steel Round Tube: 2.25" x .125 wall Chromolly Round Tube: 2" x .125 wall Mild Steel Solid Rod: 1.25" Mild Steel Square Tube: 2" x .125 Minimum OD: .25" Maximum Center Line Radius: 7" Minimum CLR .5" Electrics: 110 Volts Weight: 325 Lbs.
RDB-150 or RDB-175 Hydraulic Rotary Draw Bender: Click to Request our quote for these machines Capacities: Mild Steel or Aluminum schedule 40 Pipe: 2" Stainless Steel schedule 40 Pipe: 1.5" Mild Steel Round Tube: 2.5" x .125 wall Aluminum Round Tube: 2.5" x .156 wall Stainless Steel Round Tube: 2.375" x .125 wall Chromolly Round Tube: 2" x .125 wall Mild Steel Solid Rod: 1.25" Mild Steel Square Tube: 2" x .125 Minimum OD: .25" Maximum Speed to 180 Degrees: 10 seconds Maximum Center Line Radius: 7" Minimum CLR .5" Electrics: 120 Volts, 1 phase Weight: 600 Lbs. Optional: Angle-Autostop. Extra Heavy Duty model RDB-175: Same as model 150 but includes faster pump, foot pedal, angle-autostop, and larger maximum bend radius of 9".
RDB-250 Electric Programmable Bending Machine: Click to Request our quote for this machine Mild Steel schedule 40 Pipe: 2.5" Aluminum schedule 40 Pipe: 3" Stainless Steel schedule 40 Pipe: 2" Mild Steel Round Tube: 3" x.187 wall Aluminum Round Tube: 3.5" x.250 wall Stainless Steel Round Tube: 3" x .125 wall Chromolly Round Tube: 2.5" x .125 Mild Steel Solid Rod: 1.5" Mild Steel Square Tube: 3" x .125 Maximum Center Line Radius: 24", Min CLR: .5" Electrics: 220 volts, 1 phase Weight: 620 Lbs. Optional: Programmable Memory Made in USA
RDB-350-TS Electric Programmable Bender: Click to Request our quote for this machine This tubing bender has a maximum CLR is 24" which is our largest for these machines, Touch Screen Programming with memory for 175 programs. Mild Steel schedule 40 Pipe: 2.5" Aluminum schedule 40 Pipe: 3" Stainless Steel schedule 40 Pipe: 2" Mild Steel Round Tube: 3" x.187 wall Aluminum Round Tube: 3.5" x.250 wall Stainless Steel Round Tube: 3" x .125 wall Chromolly Round Tube: 2.5" x .125 Mild Steel Solid Rod: 1.5" Mild Steel Square Tube: 3" x .125 Maximum Center Line Radius: 24" Minimum CLR: .5" Electrics: 240 volts, 3 phase. Weight: 1200 Lbs.	Made in USA
RDB- 500 Hydraulic Rotary Draw Bender: Click to Request our quote for this machine Mild Steel schedule 40 Pipe: 3" Aluminum schedule 40 Pipe: 3.5" Stainless Steel schedule 40 Pipe: 2.5" Mild Steel Round Tube: 3" x .250 wall Aluminum Round Tube: 3.5" x .187 wall Stainless Steel Round Tube: 3.5" x .187 wall Chromolly Round Tube: 3.5" x .187 wall Mild Steel Solid Rod: 2" Mild Steel Square Tube: 3" x .250 wall Maximum Speed to 180 Degrees 36 Seconds Maximum Center Line Radius: 12", Minimum CLR .5" Electrics: 220 volts, 1 phase, 30 amps. Weight: 1800 Lbs. One shot bending up to 206 degrees without stopping or ratcheting. Bends pull out in seconds (no disassembly required). Unique design coupled with powerful hydraulic pump reduces production time and improves efficiencies. Quick release counter die. Highly visible degree dial improves accuracy. Solid steel construction for durability. High quality industrial hydraulic system. Bend can be advanced after stopping machine, saves on set up costs (material savings). Bend round or square tubing, pipe, flat stock, angle iron, or solid rod. Autostop option for one bend programming.	Made in USA

HPB-45

45 Ton Hydraulic Horizontal Press
Click to Request our quote for this machine
Stroke in and stroke back is controlled with two hand wheel adjustments and also in a digital version that allows for programming several hundred complex functions. Table is made with tempered and ground steel, the carriage runs on double guides with dust scraper and forced lubrication. The mobile pin moves at two speeds and the stroke is adjusted via a high precision electrical limit switch. Built in lubrication system. Standard 90° bending die set included for flat bar (bends rebar too).

Max operating pressure: 45 Tons
Table Dimensions: 630 x 1100 mm
Table height: 955mm
Press bending capacity: 120 x 15mm
Stroke adjustment: 250mm
Tool Holding Pins Height: 120mm
Tool Holding Pins Diameter: 55mm
Distance between pins:120mm Min/370mm Max
Motor: 4 HP, 240V, 3 Phase, 60 Hz.
Horizontal Bending press dimensions:
1200mm wide x 1150mm long x 1110mm high
Weight: 900 kg

Click for our Pipe and Tube Notching machines webpage

Click for American Machine Tools Company Homepage