Cutter Grinder - Tool Grinder Machines:

Tool Grinder model M40

Standard Features:
• Universal tool and cutter grinder, Cincinnati type
• Designed as a versatile tool sharpener and can also be used for light cylindrical, surface and internal grinding operations with some optional accessories.
• The wheelhead can be tilted +/- 15 degrees, and swiveled 360 degrees in the horizontal plane. This allows the setting of rake and relief angles.
• The wheelhead spindle is supported in two pairs of angular ball bearings, which are preloaded.
• The spindle is lubricated for life.
• The workhead can be positioned along the table and can be swiveled vertically and horizontally. It has a taper hole in each end of the spindle (one side is ASA50 and the other MT5)
• The table can be swiveled +/- 60 degrees. This along with the wheelhead swiveling permits grinding long cutters and tools.
• The table ways are hardened and ground.
• Antifriction ball bearing assemblies allow easy and smooth positioning.
• Fine feed knobs on the right and left side of the table allow fine to rapid feed range of the table. A crank allows fine feed control on the right side of the table.
• The tailstock can be positioned longitudinally along the table. The center is retractable for easy workpiece loading between centers.
• Table dogs are used for table positioning and cushioning
• Fully centralized lubrication system for the longitudinal and cross ways, and cross feed screw and nut.
• Optional grinding attachments are available to allow face mill, radius, helical, cylindrical, internal, surface, drill point, lathe and planer tool grinding.

Click to Request a formal quote that includes complete information about the M40 Grinder

Standard Equipment:
• Workhead • Leveling pads (3 pcs.) • Draw-in bolts for workhead and washer • Collet wrench • Left and Right hand tailstock • Wheel guard holder (long and short) • Belt for spindle drive (Poly-flex belt) • Grinding wheel sleeves (5) Reducing collet B & S or MT #5 x #2, 3 & 4 (3) • Sleeve extracting bar • 4" spindle extension • Ejector rod • 4" extension wheel sleeve & collar • Center gauge • Center for workhead spindle B & S or MT #2 • Pin wrench • Plain tooth rest holder (with off set blade) (2) • T-wrench for grinding wheel sleeve • Washer for 1/8" grinding wheel • Grinding wheel (7 in 6 sizes: 6x3/4x1.25, two 6x1/2x1.25, 3.5x1.5x1.25, 4x1/16x1/2, 5x1.5x1.25, 3x1/2x1/2") • Wheel guards (4) • Diamond dresser holder • Touch -up paint • Tool cabinet • Micrometer adjustable tooth rest (w/ round top table) • Double end wrench • Extension & washers of slit-saw & side-mill cutters • Universal tooth rest plate & blade holder extension • Allen type wrench • Nut wrench (2) • Driver

Specifications:
Swing Over Table: 10"
Distance Between Center: 27 1/2"
Distance Between Tailstock & Workhead:
22 3/4"
Taper Hole In Workhead Spindle: ASA No.50 & M.T. No.5
Table T-Slot (Number & Size): One 0.565"
Table Working Surface: 5 5/16" x 37"
Grinding Wheel Spindle RPM:
2600, 3700, 6200 RPM
Grinding Wheel Spindle Motor: 1 HP
Table X Travel: 16"
Table Y Travel: 10"
Cross Movement of Saddle: 10"
Graduation for Table Swivel Movement: ±60°
Table Graduation on End, For Taper of: ±10°
Wheel Head Tilts: ±15°
Wheel Head Swivels: 360
Wheel Spindle Center to Top of Table: Max 12"-Min 2"
Wheel Spindle Center to T-Slot Center: Max 16 1/2"- Min 6 1/2"
Voltage: Choose 220 or 440 Volts, 3 phase
Net Weight: 2,560 Lbs.
Machine size: 58" x 58" x 60"

Optional Accessories:
• Dust Collector
• Face Mill Grinding
• Radius Grinding 0-1" (4" Max. Dia of Cutter)
• Radius Grinding 0-2" (11 3/4" Max. Dia of Cutter)
• Helical Grinder
• Cylindrical Grinding W / 3Jaw Chuck
• Internal Grinding
• Work Head Indexing
• Extended Grinding Wheel Spindle
• Surface Grinding
• Lathe And Planer Grinding
• Spring Collet Set
• Coolant System
• Drill Point Grinding
• Wet Grinding
• Wheel Flange.

Tool Grinder model MN2

Standard Features and Equipment:
• Cast Iron Base
• Designed To Grind Complex Tools
• Table And Work Head Controls Motorized
• 18 Standard Tooling Items

CAPACITIES:
Swing over main slide: 12 inches
Collet work diameter: 0.12 min. to 1.25 max.
Lead generated by spiral lead mechanism: 1.81" min.
Length between spindle nose and tail center: 6" max.
Grinding wheel diameter: 4" max.

RANGE (Workhead):
Main slide travel: 5.75"
Offset slide travel: 5.25"
Workhead horizontal plane angular adjustment: 235°
Workhead vertical plane angular adjustment: +/-40°

RANGE (Wheel head):
Longitudinal slide travel: 6"
Vertical slide travel: 9.50"
Cross slide travel: 7.50"

POWER Etc:
Workhead speed: 436 RPM
Workhead motor: 1/4 HP
Wheel head speed: 3600 RPM
Wheel head motor: 1/2 HP
Voltage: 220 volts 3 phase or 440 volts, 3 phase
Weight: 1525 Lbs.
Machine Size: 60 x 67 inches

Click to Request a formal Quote that includes complete information about the MN2 Tool Grinder

Optional Accessories:
• Large Cutter Radius Grinding Attachment
• Four Inch Universal 6-Jaw Chuck for workhead additional index
• Plate for Spiral Lead Indexing Unit
• Additional Diamond Trueing Tool W/ Diamond Nib
• Flange to mount 1/2" grinding wheel
• Spring Loaded Index Pawl For Workhead Index
• Additional Straight Cylindrical Collet
• Wheel Flange