|
Flagler
Machines
|
|||||
 |
|||||
Flagler pittsburgh lockformer machines -
still 100% made in USA
Buy a
heavy duty Flagler rollforming machine to form your sheet metal duct
work. Flagler machines are famous for being well engineered and well
built to last for a lifetime of heavy use. Many congfigurations available
that are not shown here.
Click for our other HVAC and Pittsburgh Machines.
| 30 gauge | 28 ga. | 26 ga. | 24 ga. | 22 ga. | 20 ga . | 18 ga. | 16 ga. | 14 ga. | 13 ga. | 12 gauge |
| .0125 " | .0156" | .018" | .024" | .030" | .036" | .048" | .060" | .075" | .090" | .105" |
| .32mm | .40mm | .46mm | .61mm | .76mm | .91mm | 1.2mm | 1.5mm | 1.9mm | 2.3mm | 2.7mm |
|
Flagler 24 gauge Pittsburgh Machine: Portable
Machine. 5/16" width pocket with hammer over edges. Uses
1" of metal. 24 gauge to 30 gauge. |
 |
|
Flagler 22 gauge Pittsburg Machine: |
 |
|
Flagler 20 gauge Pittsburgh Machines: |
5/16"
width pocket with adjustable hammer over edges. 20 to 26 gauge.
Extended shafts for extra roll set. Dimensions: 36" L x 17" W x 37" H.  |
|
Flagler 18 gauge Pittsburgh Machine:
|
Adjustable
width pittsburg pocket with adjustable hammer over edges.
|
|
Flagler 20 gauge Button Lock Machine: Flagler 20 gauge Snap Lock Machine: Call 773-334-5000 to order this machine. |
 |
| Flagler
S-Cleat Machine: Click to request a quote for this machine Forms a full reinforced S-Clip on 22 to 28 gauge metal. Extended shafts for extra roll set on other side.
|
Heavy
Duty High Speed Rollformer. Motor: 5 HP, 230/460 volts 1800 rpm Double V-belt drive. Speed: 100 feet per minute. Shipping Weight: 1200 Lbs. Dimensions: 34" L x 16" W x 14" H  |
| Flagler
Quad-Former: Click to request a quote for this machine Comes with 2 sets of rolls down the center to form a full reinforced S-Clip on 22 to 28 gauge and to form a 1-1/8" Drive Cleat on 20 to 28 gauge. Includes Dual auxillary shafts for 2 extra roll sets. Optional Slitting Attachment
|
Heavy
Duty High Speed Rollformer.
|
|
Flagler Heavy Duty Power Flanger: |
 Dimensions: 24" L x 24" W x 38" H |
|
Flagler 24 gauge Collar Machine: Designed to form 1/8" hem and curl the metal from 5" diameter up to 12" diameter on 2-1/8" wide blanks.
Capacity: 24 gauge. |
 |
|
Flagler 22 gauge Gang Slitter-Beader: Capacity:
3 cuts on 22 gauge to 26 gauge metal at a speed of approximately
60 linear feet per minute. This unit is available in 3 models
- 36", 48" and 60" widths. A fully adjustable feed gauge allows
for the slitting of any increments down to and including a 4"
wide starting blank. These Flagler slitters will slit bronze,
aluminum, brass, and other materials as well as conventional
galvanized sheets. All blade assemblies are fully adjustable
over width of the machine. Micrometer adjustments on the main
slitting arbor for fast, positive adjustment. Completely guarded
for safety. This unit is self feeding and is powered by a 1/2
HP 115 volt motor.
|
|
Many other Flagler machines are available but not shown here. Call us for more info.
Click for American Machine Tools Homepage
American
Machine Tools Corp.
5866
Northwest Hwy
Chicago IL 60631 USA
Phone: 773-334-5000
Fax: 773-442-0314
Click
to email us
Website by eMarketAmerica
Copyright © 2001-2021
American Machine Tools Co.
All rights reserved
Offers from American Machine Tools Corporation include include Terms and Conditions shown on our website.
Liability is strictly limited to those warranties of fitness for purpose and safety as provided by the manufacturer.
Products and Logos in this website are trademarks or registered trademarks of their respective companies or mark holders.