3 Way and 4 Way Press Brake Dies:

4 Way Dies, 3 Way and Die Holders - scroll down this page

Commonly used for their ability to be easily rotated so a different die width faces up for bending a different metal thickness. Our 3 way and 4 way dies come in many standard sizes or any custom combination of V openings you want for standard metal bending. The multiple different width die openings are great for bending different thicknesses or different types of metal. We also have them with a die holder slot. Just click to request a quote for what size and length you want. Tell us what brand brake press machine you have and what length tooling you want. You can also order them custom made for radius forming. Every multiple V Die we make comes with threaded ends for installing rotation handles. Our riser blocks can be used as die holdes designed to hold 4 way dies or standard dies.

Click for General Purpose 90 degree Sheet Metal Forming Punches and Dies
Commonly used for forming 90 degree bends. Forming bends greater than 90 degrees is also practical by air bending.

Click for Acute 30 degree Press Brake Punches and Dies Acute Dies are the most universal type of press brake dies. Recommended as a starter set. Make air-form bends from 30° to shallow bends, and also for first operation set in hemming.

3 Way Bottom Dies for your Press Brake machine:

12 sizes to choose from. Just choose the size that has the different V-die sizes you want. Then just click to request a quote, fill out the form and we will send you a formal quote by fax or email. Each Multi-Way Bottom Die can be made with threaded holes for handles at each end for easy rotation when you want to change which side faces up. Call our office or just click to request a quote for the size you want and tell us the length you need.

4 Way Bottom Dies for your Press Brake machine:

12 sizes to choose from in 6 different lengths. Other lengths available, just ask us. Just choose the size that has the different V-die sizes you want. Then just click to request a quote, fill out the form and we will send you a formal quote by email. Each Multi-Way Bottom Die will be made with threaded holes for handles at each end for easy rotation when you want to change which side faces up. Call our office or just click to request a quote for the size you want and tell us the length you need.

Die 4-22
Click to Request this Quote at 4 feet long
Click to Request this Quote at 6 feet long
Click to Request this Quote at 8 feet long
Click to Request this Quote at 10 feet long
Click to Request this Quote at 12 feet long
Click to Request this Quote at 16 feet long

Custom Made 4 Way Dies:

We can custom make a 4 Way Die with any configuration you want. The picture shows a 3 standard sheet metal bending Vees and and 1 radius bending groove. Think of the possibilities. Each Multi-Way Bottom Die can be made with threaded holes for handles at each end for easy rotation when you want to change which side faces up. Height considerations need to be measured and accounted for when you order since these are custom made. Call our office 1-773-334-5000

Combination Press Brake Die & Holder:

We can also make a 2 Way or 3 Way Press Brake Die that has a standard 1/2 inch wide x 5/8 deep slot to allow your 4 sided die to be used as a Die Holder. Each Multi-Way Bottom Die can be made with threaded holes for handles at each end for easy rotation when you want to change which side faces up. Height considerations need to be measured and accounted for when you order since these are custom made. Call our office 1-773-334-5000.

Press Brake Die Holder & Riser Block for 4 way dies and standard bottom dies

We manufacture Die Holders that can be made to hold a 4 way die or 3 way die that fits into dimension A. Or we can make it wider with positioning screws to hold multiple widths. We can also make it with a slot in the middle to hold a standard die. This die holder also acts as a riser block. We have 2 heights to choose from.
Click the Holder # to request the price.